Berlin Outdoor Activities

Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

[NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
(Click to see Full Size)

What is The Train?

‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

Killing the Boar champion while on the Train in Queensdale
(Click to see Full Size)

If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

[On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

Killing the Troll champion while on the Train in Queensdale
(Click to see Full Size)

How does one ‘get on’ The Train? 

First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
(Click to see Full Size)

The Route that The Train takes usually runs like this (repeatedly):

  • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
  • Kill the Boar champion in the hills there, NW of the Hunting Lodge
  • Fast Travel to the Vale Waypont and head into the caves just to the west
  • Kill the Troll champion inside the caves of Altar’s Windings
  • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
  • Kill the Rotting Ancient Oakheart champion at the forest’s edge
  • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
  • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
  • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

Killing the Oak champion while on the Train in Queensdale
(Click to see Full Size)

A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

Killing the Spider champion while on the Train in Queensdale
(Click to see Full Size)
That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

[UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
[UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
[UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
Boar-Troll-Bandit-Oak
I am working on a new, updated version of the map and will insert it here when finished.
For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

See You In The Game!

WORKOUT ANYTIME Featured in Black Enterprise

WORKOUT ANYTIME Featured in Black Enterprise

Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
You can view the full article here. 

And More: Deal and Sales – Battlefield 4 Expansion, Second Assault is Free from EA – Two Days Left [Notification]

Just a quick mention, for those who didn’t catch it yet or for those who play [or never stopped playing!] Battlefield 4Second Assault, the Expansion pack that adds Four Maps, Five Weapons, Ten Assignments and more, is currently being given away Free from EA/Origin until the 28th – that’s only two days left to go get it!

Battlefield 4: Second Assault Expansion Pack Information Panel
in the “On The House” Section [ Free Games > On The House] in EA’s Origin Game Client (Click to see Full Size)

Note that you need to already own Battlefield 4, as this is an Expansion Pack, but you can still get it now – even if you don’t own BF4 – and play it later. Go and Download it now! GOGOGO

Battlefield 4: Second Assault Expansion Promotional Wallpaper by EA, Unedited
(Click to see Full Size)

See You In The Game!

Workout Fuel Conclusion

Workout Fuel Conclusion

WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
Workout Fuel | WORKOUT ANYTIME

9 Benefits of Orange Jasmine for Health and Beauty

9 BENEFITS OF ORANGE JASMINE FOR HEALTH AND BEAUTY

9 Benefitsof Orange Jasminefor Health and BeautyOrange jasmine (Murraya paniculata L.) usually grows wild on the edge of the forest, in the undergrowth, and guardrail garden and planted as an ornamental plant in the yard. Such as ylang and jasmine flowers, yellow flowers are also often used for traditional medicine. Parts of plants that can be used is the leaves, twigs and roots. Skins and stems are also useful for medicine.
Leaves and twigs are useful in overcoming inflammation of the testicles (orchitis), could also overcome inflammation of the airways (bronchitis), urinary tract infections, gonorrhea, vaginal discharge, and come irregular menstruation, body fat overload, and slimming the body, pain ulcer (ulcer), dental pain and soften the skin.
9 Benefits of Orange Jasmine for Health and Beauty - 1
Its roots are also useful for treating bruises caused by collision or hit, rheumatic pain, sprains and insect bites and poisonous snakes, boils, eczema and scabies. While the bark is also useful to overcome tooth pain, pain due to open sores in the skin or mucous membranes (ulcers).
1. Can Smooth Skin
Yellow leaves are still fresh as much as 30 g washed and then pounded until creamed. Add 1 cup of water was while in the mix with the average. The material is then scrub the skin before bedtime.
2. Can Smooth Menstruation
Yellow leaves and leaves of henna (Lawsonia inermis) each fresh ingredients as many handheld ½, 1 finger rhizome of ginger leaves, washed and cut into pieces as needed. Add 3 cups water was then boiled until the remaining 1 cup water. After the cold filtered water, then drink 2 times a day, each ½ cup.
3. Treating Urinary Tract Infections
Yellow leaves are still fresh as much as 35 g washed and then add 3 cups water. Boil until the water remaining half. After all cold filtered and taken 3 times a day, each is ½ cup.
4. Inflammation of the Testicles
Provide 9 sheets of yellow leaves are still fresh as much as 60 g and bitter herbs as much as 35 g washed and then boiled in 3 cups water until the remaining 1 cup water. Once everything is cold filtered, then taken 2 times a day, each ½ cup. Do it every day until cured.
9 Benefits of Orange Jasmine for Health and Beauty - 2
5. Can Slimming Body
Yellow leaves are still fresh and the leaves of noni (Morinda citrifolia) each and a total of a handful of Intersection dribbles too much as half a little finger until finely ground. Add 1 cup cooking water, stirring until evenly distributed. Wring with a piece of cloth. Water that is collected while drunk in the morning before eating.
6. Can Treat Toothache
Oil that comes out of the bark of yellow flowers are already burned dripped on the hollow.
7. Can Treat Arthritic Joints
Orange Jasmine root and root (Lantana camara) washed, then add 3 pairs of chicken legs. And all the ingredients are cut into pieces as needed and then add enough water to be submerged. All the ingredients are then cooked. Once cooked and the water is drunk warm.
8. Can Heal Bruises
Orange Jasmine and glass plate, respectively, and the fresh leaves, the same lots, washed and then finely ground. Add some wine while stirring on a fire. Then Warm taped at the bruised body.
9. Can Treat Boils
Dried yellow root that is as much as 30 g washed and cut into pieces as needed. Boil 3 cups of water until the water boiled only the remaining l glasses. Once cool then filtered then drink. In day 2 times, each ½ cup.

Okay, that was it some yellow flowers benefits as a traditional medicine to cure various diseases. Hopefully article 9 Benefits of Orange Jasminefor Health and Beautycan we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

My trip to Wadduwa

I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

See You In The Games!

Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

  • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
  • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
  • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
  • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
  • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
the recording utility built into the NVIDIA Drivers
(Click to see Full Size)

Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

  • Uninstalling/Reinstalling GeForce Experience
  • Installing an older version of GeForce Experience
  • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
  • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

How to Get Rid of Cellulite

Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

There is a definite genetic component to cellulite which does run in families.
Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

Getting Rid of Cellulite

Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

The 1 Minute Workout

The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
1 Minute Workout Protocol

Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
running, jogging or cycling depending on your preference and fitness level.
Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
Do active recovery at a light pace for 2 minutes
Perform another 20 second sprint at your best possible pace.
Do active recovery at a light pace for 2 minutes
Perform a third and final 20 second sprint at your best possible pace.
Cool-down for 2 minutes.
Total workout time – 10 minutes!
Frequency

Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

Reminder: Diablo II – 2014 Ladder Reset is May 27th

That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
(at least until the botters get going)
See You In The Games!

Carbohydrates Benefits For Body Health

CARBOHYDRATES BENEFITS FOR BODY HEALTH

Carbohydrates Benefits For Body Health – Carbohydrates are one of a wide variety of organic compounds which are abundant in the earth. Understanding carbohydrates consist of carbon, oxygen, and hydrogen. The function of carbohydrates is very diverse and very useful for living things. The function of carbohydrates for mortal one as a fuel source.
For plants during the photosynthesis process can turn carbon dioxide into carbohydrates. The carbohydrate contains a carbonyl functional group and a hydroxyl group. The term of carbohydrates was originally used on a class of compounds which has the formula (CH 2 O)n.
Molecular form of the simplest carbohydrates consisting of a simple sugar molecules called monosaccharides. Many of carbohydrates which is a polymer composed of molecules and sugar molecules are strung into a long chain and the chain can forked branch, called polysaccharides. In addition to monosaccharides and polysaccharides, there are others that is a disaccharide (a series of two monosaccharides) and oligosaccharides (a series of several monosaccharide).
Carbohydrates Benefits For Body Health - 1
Monosaccharides
Monosaccharides are the simplest carbohydrates, this is because the molecule consisting of several atoms C alone and unable to be degraded by hydrolysis into other carbohydrates. Monosaccharides can be divided into aldoses and ketoses.
Disaccharides and Oligosaccharides
Disaccharide carbohydrate which is formed from two monosaccharide molecules that bind through the OH groups by releasing water molecules. Example: maltose, lactose, and sucrose. Oligosaccharide is a polymer degree of polymerization of 2 to 10 and generally is soluble in water. If the oligosaccharide consists of two molecules is called a disaccharide, and if it consists of three molecules called triose. Sucrose is composed of molecules of fructose and glucose, maltose consisting of two molecules of glucose, and lactose molecule consists of galactose and glucose. Polysaccharides are polymers of several monosaccharide molecules can for straight or branched chain and can be hydrolyzed with several specific enzyme that’s how it works.
Polysaccharides
Polysaccharides are carbohydrates formed from saccharides numerous as the monomer. The general formula of the polysaccharide that is C6 (H10O5) n. Example: starch, glycogen, and cellulose.
There are some functions of carbohydrate that is essential for living beings, among others:
1) The function of carbohydrates as the main energy source. Carbohydrates are an important energy source such as glucose is required and can not be replaced by other sources of energy.
2) It has an important role in metabolic processes, can maintain the balance between acid and alkaline body, helping as forming the structure of cells, tissues and various organs.
3) Carbohydrates play a role in the process of digestion.
4) Assist in the absorption of calcium.
5) Represents forming other compounds.
6) Carbohydrates are the constituent components of the genes contained in the nucleus of cells and is very important in the inheritance.
7) Assist in the process (defecate). This is because cellulose is a polysaccharide that is difficult to be digested, but its presence is very helpful to prevent constipation.
Carbohydrates can be found in many foods, here are a few sources of carbohydrates:

Carbohydrates Benefits For Body Health - 2


• Egg whites
• Potatoes
• Seed grain
• Corn
• Cassava
• Bread
• Pasta
• A variety of dairy products
• Fruit Fresh Fruits
Sweet potato
Nuts
Brown rice
• Sago
That article on the definition of carbohydrates, a source of carbohydrates and carbohydrate function. The presence of carbohydrates is important and needed by the human body. Definition of carbohydrates which is one of a wide variety of organic compounds which are abundant in the earth. Therefore, it is good not to overdo and shortcomings in meeting the needs of carbohydrates. The good step is to keep carbohydrate intake remains balanced.

Hopefully article Carbohydrates Benefits For Body Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

1960 Lincoln Continental mk 5 Formal Limousine

in the above photo, lower left side, you can see the air conditioning vent under the grab bar

and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

and the AC takes up about a 1/3rd of the trunk space

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

[Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
I may return to add some Images and/or Screenshots in the future.
This post will be Updated for the next few days, as I encounter new related information.]

If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

Issues Seen/Encountered:

  • Game not starting [Launcher will start, but game itself will not show up]
  • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
  • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
  • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

Steps Taken/Tried:

  • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
  • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
  • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

The weight question

‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

Diet Start

Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

An example of the Black Friday Weekend Sales for 2013 on Steam

A small example of the Black Friday Weekend Sales for 2013 on Origin

An example of the Black Friday Weekend Sales for 2013 on Gamefly

See You In The Games!

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

It’s Not Just You™ – Battle.Net Issues with Logging In Today [Notification]

Just a quick post to let others know that if you are having logging in to Battle.Net today (August 1st) that lots of people have been having problems as of this morning. Blizzard has addressed this with a quick note via their twitter, seen at:

https://twitter.com/BlizzardCS/status/760100687111938048

Retry or Go Back To Bed? Hmmm….

For those playing Blizzard/Battle.Net games this weekend, hopefully it will be up soon – just letting you know, It’s Not Just You™ !

Workout Anytime Featured in Franchise Times

Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

Click HERE for the full article or begin reading below:

Nest Eggs

Done right, a rollover of retirement funds can be smart option

By: Jeffrey McKinney
More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

Now on Instagram!

I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

Have a great weekend!

Reading in the Wild – Chapter 1

I absolutely loved Donalyn Miller’s book The Book Whisperer: Awakening the Inner Reader in Every Child, so I was very excited to see that she released a new book – Reading in the Wild: The Book Whisperer’s Keys to Cultivating Lifelong Reading Habits AND that Catherine over at The Brown Bag Teacher has organized a summer book study of it.

Chapter 1 – Wild Readers Dedicate Time to Read

Already, this book has lots of ideas that I can integrate into my classroom. In fact, I suspect that I will re-read each chapter just to make sure I’m recording all of the ideas so I remember them in August. (And I may go back and re-read The Book Whisperer, too!) But one thing that I really want to emphasize this year is building a community of readers. I like the idea of students sharing the books they’re reading and making recommendations to each other. Personally, I use GoodReads to track that information for myself (I’ve blogged about that before here). I’ve also had my students blog about their reading (see here). But what I’d really like is something more like GoodReads – a social networking site – but appropriate for fourth graders. 
I recently stumbled across the site Reading Rewards through a Twitter Chat, and this might be the answer I’m looking for. 

This site allows you to set up your class into a reading community where they can create libraries of the books they’ve read, write book reviews, get and make recommendations, and make a wishlist of books they want to read. There is also a reading log component and a reward system that allows you and parents to create rewards based on achieving individualized reading goals. I haven’t had a chance to try this out with students yet, but based on my exploration of the site, it looks very promising.

Do you have any experience with the Reading Rewards website? Have you come across any other sites you’d recommend for building a community of readers? I’d love to hear about it in the comments.

The Benefits of Jump Training

Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
  
There are three distinct phases to jump training:

The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

There are many benefits to jump training including:

Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME in the Idaho Business Review

WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
You can also view the full article here.

Peanut Benefits for Health

PEANUT BENEFITS FOR HEALTH

Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
Peanut Benefits For Health - 1
Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
Peanut Benefits for Health
1. Helps To Increase Fertility
For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
2. It Can Prevent Painful Gallstones
During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
Peanut Benefits For Health
3. Can Help Reduce Depression And Stress
Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
4. Can Improve Memory
The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
5. Lowers Bad Cholesterol
Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

See You In The Game!


[Update: As of July 20th, the Double XP Boost is now over… See you next time!]

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Monitoring weight loss

There are two schools of thought on how to monitor weight loss:

  • Daily weighing
  • The once-weekly weigh-in.

This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

Diet Start

TOP ANTI-SNACKING TIPS

  • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
  • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
  • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
  • If you are going to snack, make sure it is a protein snack.

Dietary demons – and how to beat them

  1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
  2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
  3. Alcohol: you are allowed a couple of glasses of wine when you start the
  4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
  5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

Curb your cravings by curbing your carbs

When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

High-quality protein

Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

Diet Start

Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

What is Biological Value?

In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

The only whey to go

To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

¨ It encourages the formation of lean muscle mass

¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

¨ It helps to build healthy new collagen

¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

¨ It is a quick and easy way of having a high-protein meal or snack

¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

WORKOUT ANYTIME in Buffalo Grove Patch

WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

24/7 Gym Opens in Buffalo Grove
By: Cristel Mohrman

Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

“We really like this location a lot,” co-owner Eric Nagel said.

(Read More)

In Defense of Classroom Technology

Usually when I talk to people about the fact that I teach in a 1:1 iPad classroom, they think that’s awesome. But now and again, I’ll run into someone who thinks handing a kid an iPad in school is an atrocity, and I feel like I have to defend the work that I’m passionate about. This happened to me recently at a social event when my attempts at small talk quickly turned into a debate about what we’re “doing to kids today.” The naysayers certainly exist, and this particular encounter made me pause to think about why I feel so strongly about this topic.

Here are some of the reasons I feel it’s in the best interests of both students and teachers to maximize the use of classroom technology.

My students explore constellations on their iPads.

1. It teaches real-world problem solving skills.
Being good at technology is largely a result of being willing to experiment and fail. I wasn’t born knowing everything there is to know about iPads or Evernote or Edmodo — I’ve learned by trying different things and seeing what worked and what didn’t. When I can’t figure it out on my own, I talk to others or look for the information I need online. Now I get to see these skills in my students. Whenever they need to troubleshoot something, they work together to find a solution. They don’t give up or think it’s impossible. In this high-tech world, these skills are going to be incredibly valuable.

2. It facilitates better communication between home and school.
If parents want to know what we’re doing in class each day, they can find all of our homework and activities on our class website. If they want to monitor grades or see what assignments are missing, they can look on Edmodo. If they want to know what their child’s behavior was like at school today, they can look on ClassDojo and get a report. If they want to know what their child sounded like reading a 4th grade leveled text at the beginning of the year compared to now at the end of the year, I can pull up the child’s audio recordings on Evernote. Technology makes it easier for parents to know what’s happening in school, and I’m happy about that.

3. It makes students better writers.
Without question, writing skills are incredibly important. When I think back on all of the essays I had to write in high school and college or the cover letters I wrote to get opportunities I have today, I know that my ability to write mattered. Technology makes students better writers for a variety of reasons:

  • It makes them more open to revising and publishing their work when they don’t have to handwrite the whole paper over again.
  • It teaches them typing skills that will make them more efficient at writing and therefore able to write more. 
  • It gives me more opportunities to give them feedback about their writing because I can easily collect samples at various points. I can have them turn in a copy of a draft wherever they’re at without interrupting their work because I don’t have to collect a notebook. 
4. It keeps kids engaged.
I used to have students write book reports. Now I have them write book blogs on KidBlog and make book trailers using iMovie. It’s basically the same assignment, but now students are motivated and engaged to complete it. They have an audience of their peers that makes their work more authentic, and it’s something that can’t be easily replicated without technology. The effort and outcomes my students experience because of technology is something that should be encouraged.

5. It benefits all types of learners.
I think a lot of the criticisms of technology assume that students are being passive consumers of it — watching videos or playing video games all of the time. Without question, technology could be used as a high-tech babysitter, but that’s not how it’s being used in my classroom at all. When my students use their iPads, they are active and interactive, and they’re expressing their creativity in so many ways now. They’re making movies, writing stories and articles, becoming budding photographers, and interacting with the world and each other in new and exciting ways.  They’re still collaborating and developing the interactive social skills necessary to be productive citizens of society.

6. It keeps everyone more organized.
I can’t begin to describe how many minutes I’ve lost over the last 6 years because students couldn’t find a paper or a notebook. Then once it was turned in, I’d have to shuffle through piles of nearly 30 to find what I was looking for. Add to that the fact that students work at different rates and finish tasks at different times, and you have the potential for an organizational nightmare.

I’m a pretty organized person, but without any hesitation I can say that technology has made my students and me substantially more organized. Everything we need can be found on an iPad or a computer. There isn’t instructional time lost finding materials or planning time lost figuring out where I filed that lesson idea or who is missing work. It’s all in one spot.

7. It allows me to give better feedback.
My students recently took a multiple choice test on Edmodo. I’d entered the correct answers before giving the test, so when I went to look at the results, it was already graded for me. Rather than spending time rifling through a pile of papers to mark answers right or wrong, I was able to type specific feedback to the students. For example, when several students missed question #6, I typed 2 sentences explaining the problem with the answer choice they selected and why the other choice was better. With the help of copy and paste, I was able to give that feedback to all applicable students in less than 5 minutes. How often do you think I could accomplish that in a world where I had to handwrite the comment 15+ times? It wouldn’t happen. I wish it could, but it’s not feasible.

8. It gives me more information so I can help students.
I routinely ask my students to solve math problems and explain their thinking. Sometimes they have to explain it in words and sentences, but other times I let them use their iPads to make short (30-60 second) videos narrating their solutions and the steps they took. Similarly, when I do reading assessments with students, I can use my iPad to record the student’s voice as the student reads. This creates an artifact that I can listen to, share with parents or RTI committees, and analyze in a way that wouldn’t be possible absent technology. It’s some of the best evidence of a student’s ability, and it helps me identify strengths and weaknesses so I can give students the support they need.

9. It makes me more efficient.
Anyone who’s a teacher can attest that this job sometimes borders on impossible. Teachers take on so many roles and have so many responsibilities that the stress can be overwhelming. I think that’s a major factor in why so many great teachers leave this profession within the first few years and why many capable individuals are deterred from entering the field. In my experience, technology has made this all more bearable. I don’t have to waste time shuffling through paper or hunting for files anymore. I don’t have to haul carts — literally carts — of student work and planning materials home anymore. I can find exactly what I need wherever I’m at because everything is electronic. It’s made me much more productive and efficient, and everyone benefits as a result.

10. It’s appropriate for the world we live in.
I know a lot of people lament the fact that we’ve moved into an age of technology. I’m not one of them, but even if I were, I recognize that there’s no going back now. I’d rather introduce students to technology in safe, structured ways where I can guide them through the perils and pitfalls than leave them to struggle on their own. I also like that I can show them how to make technology work effectively for them. I’m facilitating students to be productive, creative, and responsible users of technology, and I’m not confident they’d all get there on their own.

It’s not technology that’s an issue — it’s how the technology is being used. I’m certain that the ways my fourth graders use their iPads will make them better informed, more capable citizens down the road. Is it the only way to teach them? Absolutely not, but the advantages of using technology in the classroom far outweigh any disadvantages the devices bring.

What are the arguments for or against using technology in the classroom that you’ve heard? I’d love to hear your thoughts in the comments.

Cellulite Breakdown and Essential Detoxification part 2

Beware the Heavy Metals

Whether or not you go for music of the same name, heavy metals in your body are something you want to get rid of. These elements, the concentration of which has increased dramatically in our air, foods and water since the Industrial Revolution, can seriously interfere with your body’s metabolic functioning and thus challenge its wellbeing. Mercury tends to suppress the levels of white blood cells involved in the immune response. Cadmium displaces the essential element zinc needed for a great many of your body’s enzyme systems and renders them inefficient and even inactive (including those that build new collagen and elastin for skin and connective tissues). In the West we now have a concentration of lead in our bodies some 500 to 1,000 times that of our pre-technological ancestors. High levels of this heavy metal age us prematurely, interfere with our mental processes, suppress immunity and contribute to depression. Aluminium, another heavy metal, detrimentally affects the central nervous system. It has recently been associated with the development of pre-senile dementia or Alzheimer’s disease.

Diet Start

The presence of all of these elements in excessive quantities (and their concentrations in the human body appear to be increasing with each passing decade) generally interferes with the metabolic processes on which good body ecology and therefore the absence of cellulite depends. It is important to do everything you can to eliminate them from your body. (The alginates, forms of fibre found in seaweeds, also chelate heavy metals and adding sea plants to your diet on an ongoing basis is a good idea, after your applefast is finished.) You also need to be aware of ways you can protect yourself from allowing heavy metals to build up in the first place. Here are a few suggestions:

  • Steer clear of tobacco smoke and exhaust fumes
  • Don’t buy fruit or vegetables from shops in the street where they have been exposed to leaded exhaust fumes
  • Don’t cook in aluminium pans
  • Eat plenty of fibre and nutrient-rich vegetables and fruits.

More Than An Apple A Day

Now let’s get down to the programme. An applefast can be done by any healthy person provided of course your doctor agrees. It was taught to me twenty years ago by Dr Gordon Latto, a British medical doctor who uses nothing but food and breathing and a few herbs to heal even the most complex and chronic conditions. He is almost 80 and one of the most remarkably healthy and vital men I have ever met. The applefast lasts for two or three days (never more, except under doctor’s supervision). You eat only raw apples — as many varieties as you want — for breakfast, lunch and dinner as well as in between. Eat all you want, but chew well and always crunch up the seeds too. They contain valuable nutrients that help the process.

During the applefast you need to give up all tea and coffee although you may have as much mineral water or herb tea made with mineral water as you please, sweetened with a little honey if you prefer. The best herb tea of all for The Breakdown is solidago or golden rod which you can get from a good herbalist. Like nettle, it has natural diuretic properties to help shift some of the stored water in your tissues but, unlike nettle, it actually tastes pleasant.

Don’t be surprised if you suffer the odd headache during this dynamic two or three days clear out. (Especially if you have been a dyed-in-the-wool coffee or tea drinker.) This is a sign that the whole process is happening rapidly. If you do, then take a 20-minute epsom salts bath and lie down in a darkened room to rest for 15 minutes afterwards. (More about this in a moment.)

External work on your body is important too to trigger the detoxification process. Start now to incorporate skin brushing into your daily routine. After the applefast is over continue doing it but begin to use other techniques as well to enhance lymphatic drainage, to help break up hardened connective tissue, and to keep the detoxification process going while you are rebuilding new, strong connective tissue and ground substance.

No Backtracking

No Backtracking principles

This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

  • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
  • Break totally with bad habits made in the past
  • Never return to yo-yo dieting
  • Find a healthy attitude to food and a viable eating plan for the rest of your life.

No Backtracking rules

During this phase you need to:

  • Increase your daily carb intake by no more than 10g (1/3oz) each week
  • Add new foods one at a time
  • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

Diet Start

  • Drop back to the next-lowest level of carbohydrate intake if you gain weight
  • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
  • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

Make this diet the one that works

Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

A template for life

Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

  • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
  • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
  • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
  • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
  • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
  • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

Interested in opening your own WORKOUT ANYTIME?

Think big. Keep it simple. Do it with integrity.”

Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

“People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

Site Selection and Lease Negotiation

– We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
– Site selection/lease negotiation service offered at no-cost to franchise owner
– In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
– WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

Find out more here. 

Marathon Training Tips

As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
Determining Starting Point

The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
Training Mix

Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

Strength and Mobility Training

Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
            A specific dynamic warm-up and foam rolling for areas of tightness and pain
Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
Strength Training Exercises for Running
It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
Putting it all together

If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

WORKOUT ANYTIME on Cincinnati.com

WORKOUT ANYTIME on Cincinnati.com

The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
Workout Anytime

You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

And More: How To Pronounce “ASUS” (Text-Only Version)

This is a subject that is only lightly debated on the odd game or tech forum, and like the ‘how to pronounce GIF’ argument/discussions, I almost don’t want to clear things up… but as with my earlier article on ‘How To Pronounce “GIF”‘ [found here: http://gametipsandmore.blogspot.ca/2013/05/and-more-gif-is-pronounced-jiff-like.html ], I suppose with only this little post on this lowly blog that is mostly about games (with the odd article on editing), I won’t really change things.. so here’goes:

The reason this came up at all, was that I am increasingly hearing people say their differing versions of how to pronounce the word in videos. Although most people seem to utilize either (i)“ay-zeus” (which sounds like saying, “Hey, Zeus [the Greek ruler-god of the sky], how are ya?”), or they say (ii)“ay-suss” (which sounds like a way of saying, “hey, sis, how are yah?”), some even say (iii)“ass-uhs” (which sounds like “Ask us a question” (with a silent k) or almost like “Asses” but with an ‘ugh’ at the end) [although I think that last version is just an excuse for some to say “ass” while at work, haha]. While I myself was mainly using the second version since I started working as a Computer Service Technician, there have been a couple of “Official” sources published on the intertubes since then.

Wikipedia, [arguably] a source of good information [I say arguable because ‘anyone’ can edit it to say almost anything, many people with their own agendas; but mainly it remains a source of ‘good’ info], lists phonetics for the word’s pronunciation in their article as: (/ˈss/), which is closer to the first form (i) from above, than the others (but with a softer ‘s’ sound than a ‘z’ sound)..

Engadget, a technology and-related-science information site, posted a video in 2010 [found here: http://www.engadget.com/2010/12/17/how-to-pronounce-asus-video/ ] which gives a “from now on”/Official way of pronouncing the company’s name, from the company itself: “ay-suss”, which is closer to the second form (ii) from above, than the others.

Prior to this, around the turn of the millennium, I myself was searching for some ‘official’ form of how to say the word, and the only source at that time was the ASUS website, which stated that the name came from the concept of the Greek mythological creature, Pegasus. This suggested to me (there was no ‘official statement’ on the website itself of pronunciation) to say, “ah-sus” (the second half of the name Pegasus), which is actually closer to the third form (iii) from above, which sort of sounds like “asses” but with more of an ‘uh’ sound near the end instead of an ‘eh’. This is how I would type it: “ah-sus”.

So where does that leave things today and how is ASUS actually pronounced, then?

Since there has been an ‘Official” statement, with example, we have no choice but to go with Endgadget’s exposé on the issue, which gives the pronunciation of “ay-suss” (ii).
What is important to note here though, is that it is not just said the way it is typed here. In the video at Engadget’s site, the woman demonstrating the Official way to say the word purses her lips when she says, “suss”. Therefore, it is not just a plain “suss”, it is more akin to “soos”, which sounds almost like the Dr.Seuss name that is on all those kids’ reading books.
If you ask me, this makes things a little more confused than it should be, because the sound [I don’t know the phonetic symbol for it offhand but it is present in how French-speakers say the letter “Y” in their alphabet, with pursed or puckered lips] is almost exactly between “suss” and “soos”, and yet it is neither of those.
At least the video does clear up one thing: the beginning of the word ASUS. It is not “ah” (short form of the letter A) it is more like “ay” (long form of the letter A). So then, the officially-demonstrated way of saying the company name is:

“ay” (almost, but not quite, the long form of the letter A) and then a sound that is exactly between “suss” and “soos” (with pursed/puckered lips)


That ended more complicated than I thought…

Personal Note/Opinion:

While that issue is now solved and ‘written in stone’, as it comes from ASUS itself (thanks mainly to Engadget), I have to end this post saying that I am left wondering why they changed the pronunciation from [what appeared to be] their etymological starting point. What I mean is: their website states the name came from the name “Pegasus”, but [in English anyway] we do not say “peg-ay-suss”, we say “peg-ah-suss”.
Nevermind, I think I just figured out my own query, just by typing that in and saying it out loud: I believe that they changed the pronunciation from [how we say the mythological creature’s name in English] “ah-suss” to something more akin to “ay-suss” to distance themselves from the sound of, well, “asses”. I guess I can’t say I blame them. 

I hope this article has helped, even if it only made things more complicated. That’s helping, isn’t it?

This has been a Public Service Announcement by The Game Tips And More Blog

Giveaway Winner!

I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

I went to the Random Number Generator this morning, and drumroll…

I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

Have a great weekend!

Paperless Mission #12: Collecting Student Work

This is the twelfth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #12: Collecting Student Work

Recently, I shared how I distribute student assignments through Dropbox. Today I’m going to share how students turn in those assignments. To do that, I primarily use Edmodo.

Once you’ve created an assignment in Edmodo, students will be able to see it as they log-in.

If it’s just a text-based assignment, they can type the text in the comment section and submit it.

Often, however, my assignments tend to require them to include an attachment of some sort. These can fall into a couple different categories.

Photos & Movies

The Edmodo app allows you to load photos directly from your camera roll as an attachment. Just select “Attach: File.”

Documents produced in other apps (e.g., Pages, Keynote, etc.)

This process has a couple extra steps, but it’s still easy to accomplish. First, students will need to load the item into their backpack. This is normally accomplished through the “Share and Print” option in the original app. For example, in Pages, you have the option to “Open in Another App.”

This will result in the file being added to the student’s Edmodo “backpack.” Once it’s there, students can attach it to an assignment by choosing “Attach: Backpack.”

Once the items are selected, students get to rate the assignment using the emoticons and click “Turn In Assignment.”

From my perspective, it’s a dream. I don’t have to worry about receiving “No Name” papers, and I can quickly grade and comment on student work that’s turned in.

Apprentice Guides

One of my back to school projects is to make step-by-step tutorials to help students (and teachers) with some of these iPad tasks. The first one is on Turning In Assignments from Pages to Edmodo and you can download a copy of it here.

I apologize that the image quality isn’t perfect — it lost something when I uploaded it to Google Drive for sharing, but it’s still very functional. (I’ll share higher-quality imaged versions later when I get more completed.)

What programs do you use to collect student work electronically in your classroom? I’d love to hear in the comments section.

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

Cut your Protein why no Sugar?

The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

Diet Start

Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

The Incredible Pistol Squat

The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
Pistol Squat Progressions
There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

Health Concern: FAT?

The term “fat” includes fats from meat, fish, poultry, and dairy products as well as vegetable oils and the nuts, seeds, and grains from which they have been extracted. There are two basic kinds of fats—saturated, occurring mostly in animal foods (although some vegetable fats such as the kind that coconut contains fall into this category too), and unsaturated, in the form of vegetable oils such as safflower, corn, and sunflower, and in seeds and nuts. Fish tends to contain more unsaturated than saturated fats, meat more saturated than unsaturated.

Whether saturated or unsaturated, all the fats you eat rapidly form a film around blood cells and platelets, creating a kind of sludge which causes them to stick together. This clumping significantly interferes with circulation by clogging blood vessels and even temporarily closing down small capillaries. As a result, your cells do not receive all the oxygen and nutrients they need to function efficiently. They only run at about 80 percent capacity. This interferes with cell metabolism as well as with the efficient elimination of cellular and tissue wastes.

Diet Start

The chemical structure of an unsaturated fatty acid differs from its saturated brother in that at least two of the carbon atoms in its formula are free. This means that they have no hydrogen atoms attached to them, as the molecule of a saturated fatty acid does. It was long thought that while saturated fats were bad for you, unsaturated fats were good. For unsaturated fats have been shown to reduce cholesterol levels in the blood, and therefore were believed to be helpful in preventing arteriosclerosis and coronary heart disease. That is the reason we have been encouraged in the last thirty years or so to include plenty of polyunsaturates in our diet by switching from butter to margarine and vegetable oils. The catch is that although unsaturates do this, like all fats they still raise triglyceride levels (another factor linked with coronary heart disease) and they also create the same clumping as the saturated fats do, which leads to tissue anoxia.

Women have also lately been encouraged by poorly informed writers to include lots of polyunsaturates in their diet for their beauty’s sake. Unsaturated fatty acids are an important constituent of skin and muscle tissue and so it was thought, quite wrongly, that we need more of them. For what we have not been told is that the chemical structure of unsaturated fats with their free carbon atoms makes them extremely unstable compounds, and that when an unsaturated fat is exposed even to the smallest trace of a catalytic agent it begins a process of autooxidation which results in the fat molecule’s breaking down to produce what are known as free radicals.

Free radicals are highly reactive particles which, if left unchecked in the presence of oxygen molecules, will form toxic peroxides. These peroxides can damage and destroy cells. They have also been implicated as a primary cause of the aging process itself. When a cell, or the genetic material of a cell, is destroyed by free radicals, the result is something known as a lipofuscin pigment granule—often referred to by biochemists as a “clinker.” With age, ever more cells are damaged or destroyed as tissue degenerates, leading to increase in the number of these pigment granules. This is something you want to avoid in every way you can if you don’t want to look and be old before your time.

To some extent, the presence of sufficient amounts of an antioxidant such as vitamin E in the system may prevent this from happening, because it minimizes the damage done by free radical chain reactions by breaking the chain. Vitamin E, like other antioxidants, helps block the oxidation that turns fatty acids into harmful peroxides. The more unsaturated fatty acids in your diet, the greater will be your need for the vitamin.

An interesting dietary survey that was done at the University of California at Irvine looked at over 1,000 patients and examined the degree of wrinkling and crow’s-feet, frown lines, and other indications of skin degeneration such as damage to the collagen and elastin fibers and the irregular pigmentation characteristic of old skin. The subjects ranged in age from seventeen to eighty-one and 76 percent of them were women. Cadvan Griffiths, M.D., the professor of surgery who carried out the study, discovered that there is an undeniable link between marked clinical signs of aging and the intake of unsaturated fats in one’s diet. Those who regularly and frequently included polyunsaturated fats and oils in their diet had marked signs of premature aging. Some looked as much as twenty years older than they were. Very few of those who had made no special effort to eat more polyunsaturates showed any clinical signs of premature aging. Evidence is also accumulating that links free radical reactions to the etiology of cancer, senility, atherosclerosis and hypertension—all of them disorders generally associated with aging. This is all the more reason to limit the amount of every kind of fat you eat to no more than you actually need.

BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL KITCHEN HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BATHROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEAUTIFUL BEDROOM HOME FAMILY DESIGN

BEDROOM INSPIRATION DESIGN STYLE AWUTAN

Bedroom Inspiration Design

Bedroom Inspiration series today, I decided to post some new designs that room I found in my daily online surfing. Here are the last 5 new chamber design that come in our bedroom inspiration series, now at number 7 If you want more inspiration room, you can start from here and keep the links in these posts.

Bedroom Inspiration Style

Bedroom Inspiration Modif

Bedroom Inspiration Awutan

Bedroom Inspiration Mantrap

CONCEPT INTERIOR DECORATORS NYC

Interior Decorators NYC

Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

Interior Decorators NYC
Interior Decorators NYC

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

The popup that comes up for some people, every time they start Vegas

The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

  • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
  • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
  • Rename (or delete) the file. That’s it! 

Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

**Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

Enjoy popup-free video editing once again – and See You In The Games!

Happy New Year from The Game Tips And More Blog! [NewYears’ Greetings 2017]

“Happy New Year 2017 Greetings”
by The Game Tips And More Blog
(Just Cause 3 capture, Highest Settings and FXAA, with Text and Effects added)

I personally wish you all much better things in 2017!

[To help celebrate the end of a crazy 2016 (for almost everybody, it seems) and the beginning of a hopefully-better 2017, this was simply a fireworks celebration captured in Just Cause 3 (Highest Settings, FXAA). I then added a ‘crowd’ overlay that had a bit of ‘glitter’ effects in it (used with License from CyberLink’s PowerDirector 12) and put some Just Cause 3 – styled text  on top of it all (using a free font called “Dirty Old Town” which looked somewhat like the JC3 font and another one whose name escapes me at the moment). Lastly, I put a “Text FX” Overlay effect to show the year, an effect that was also in PowerDirector 12. As always, it was seemingly simple to think of, but took longer than expected to complete the composition (almost a day late for NewYear’s, heh). 
HAPPY NEW YEAR ! ]

Game Material by Avalanche Game Studios (avalanchestudios.com) and Square Enix (square-enix.com)
Captured and Edited by Troy from The Game Tips And More Blog

Shelby Dodge Prototype truck that Carroll kept in his private collection

https://www.hemmings.com/blog/2018/04/11/selections-from-carroll-shelbys-personal-car-collection-head-to-auction-in-greenwich/

Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


Personal Log, Stardate 20160901 [I have no idea how that works heh]

Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

< Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

Sincerely,

~Troy from The Game Tips And More Blog

Paperless Mission #10: Distributing Student Assignments

This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

 

Mission #10: Distribute Student Assignments through Shared Folders

Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
This system has worked incredibly well for me! Here’s why:
  • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
  • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
  • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
  • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
  • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

The Elder Scrolls Online – “PatchManifestError” In TESO Launcher [Workaround]


[Text-Only – This post is initially Text-Only, to allow posting this as fast as possible, to help others.
I may return and add additional graphics/screenshots pertaining to the article… Soon™]


Just now, I ran into an issue starting up TESO, where the Launcher gave an error message – oddly, it was slightly different than the message my Gamer Wife beside me got – one of us got “Error 210” while the other got “Error 206”. Here is an example of what the Error Message within the TESO Client Launcher looks like:



Popping into the Steam forum and the Official Bethesda/Zenimax Forum for the game, I saw a number of people mentioning they are getting this too, just today, like me. So, I wanted to come here and post a ‘quick fix’ that can get past the error message and allow fellow gamers, like me, to be able to play the game as quickly as right now, tonight [actually it’s more of a ‘workaround’ than a true ‘fix’, as it doesn’t solve whatever issue is happening with the Launcher/Client/Servers… I will post this as a “Workaround”].

Similar to an earlier issue with the TESO Launcher I talked about here at The Blog, the ‘workaround’ involves bypassing the Launcher itself and starting up the game manually via the Executable files… The instructions to do this are below.

For the Steam Version of TESO:

  • Open Steam
  • Right-Click on TESO in the Library and choose Properties
  • Click on the “Local Files” tab
  • Click on the “Browse Local Files” button to show the directory/folder of the game
  • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
  • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game

    For the Standalone Version of TESO:

    • Right-Click on the Shortcut (the icon that runs the game) on the Desktop (or in the Start Menu) for TESO and choose Properties
    • Click on the “Open File Location” button in the Properties of the game shortcut
    • You should find yourself in a Windows Explorer windows, looking at the “Launcher” folder of Zenimax Online
    • Go up one folder level to “Zenimax Online” (click on the Zenimax Online folder in Explorer)
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)
      That’s it! Now the game should start up and you will just have to Login within the game itself.

      Unfortunately, I do not know what has caused this error, and I have not seen any Official Postings by Bethesda/Zenimax to explain it, as of the time of this writing. Although it appears to be some sort of Server/Launcher error, I cannot say specifically at this time. However, having testing this Workaround on different machines and with both the Steam Version of TESO and the Standalone/Web version of TESO, I can safely say that this should work for you, fellow gamer.

      Hopefully that helps – and See You In The Game!

      HOME DESIGN FULL OF COLOR AND INSPIRING

      It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

      Home Design Full of Color and Inspiring

      Home Design Full of Color and Inspiring

      Home Living Room Design Full of Color and Inspiring

      Home Living Room Design Full of Color and Inspiring

      Home Kitchen Design Full of Color and Inspiring

      Home Kitchen Design Full of Color and Inspiring

      Home Bedroom Design Full of Color and Inspiring

      Home Bedroom Design Full of Color and Inspiring

      Home Bathroom Design Full of Color and Inspiring

      Home Bathroom Design Full of Color and Inspiring

      Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

      Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
      Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

      Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

      Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

      This video compilation is a test of a few things:
      1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
      2) Capture quality of MSI Afterburner and performance/lag of using it
      3) H.264/AVC compression quality maintainability
      4) Youtube’s quality maintainability

      Recorded with:
      MSI Afterburner
      – v.2.3.0
      – MJPEG codec, “Full Frame”, 80% quality, 30fps
      – Audio automatically records into PCM (“Uncompressed”) format

      Recorded Game: 
      Hitman: Absolution @ 1920×1080 (1080p)
      – “Ultra” settings (Preset)
      – Anisotropic Filtering set to 4xAA
      – “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

      – “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
      – “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

      Framerate while not recording: ~31-79fps
      Framerate while recording: ~28-64fps

      I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
      I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
      In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

      A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

      The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
      In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
      Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

      ²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
      Click to see Full size

      [A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

      For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



      It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
      The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

      *As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

      ¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

      If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
      [With the RTV1 codec, it appears that it will still remain a little, no matter what…]


      Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

      Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
      MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
      Click to see Full Size

      The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
      The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
      This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

      Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

      What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

       The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

      **Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

      This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

      Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

      Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

      Overall, well done MSI.  /clap

      If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

      Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

      Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




      [Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

      a friendly stopped by to say hello, at 5000 feet

      The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

      WORKOUT ANYTIME in Journal & Topics Newspapers

      WORKOUT ANYTIME in Journal & Topics Newspapers in an article titled, “New 24-Hour Fitness Facility Opens In Buffalo Grove.” The article begins with information about the new club and then gives some details about the grand opening. The article ends with information on WORKOUTANYTIME’s plans for expansion in Illinois and some background on Jeff.  Click here to read more or begin below.

      New 24-Hour Fitness Facility Opens In Buffalo Grove

      A new 24-hour fitness facility recently opened in Buffalo Grove.

      Workout Anytime opened at 700 Buffalo Grove Rd. The facility is open 24 hours a day to members with staff on site from 9 a.m. to 8 p.m. weekdays; 9 a.m. to 5 p.m. Saturdays; and 10 a.m. to 2 p.m. Sundays. Members receive a special key card to unlock doors when staff is not present.

      (Read More)

      My trip to New Delhi & Hyderabad Cont……..

      I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

      I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

      Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

      So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

      Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

      Trip to Hyderabad Cont

      The day of leisurely travel to Hyderabad turned in to an interesting experience for me. Here’s how it went.

      There were of course no issues in getting to the Airport or getting checked in. At the checking counter I asked the Jet Airways staff if there were any restrictions of taking a bottle of liquor to India. At which point I was told “NO SIR”. When I checked in however they were unable to check my baggage through to Hyderabad since I was changing from International to Domestic (Still Jet Airways) I was told that I need to put my bag through customs at Chennai.

      Things went smoothly from there; got through Immigration, went and bought 500ML bottle of Black Label, went through security, boarded and arrived in Chennai on time. Jet airways must be congratulated for on time flights between Colombo and Chennai. Their service too was quite good.

      Things turned in to a big process when I got to Chennai. First I had to go through Immigration, it was smooth, then through Customs, also no issue, then physically had to come out of the International Terminal and go in to the Domestic Terminal. I was told that Jet Airways staff would be there to guide the transfer passengers, however there were no staff and there were no sings to direct. I asked for instructions and got to the Jet Airways counter without any trouble. Yes I did change some money as well. At which point I was told that I need to put my luggage through the security scanner again so had to Drag my bag to the end of the terminal and re-put the bag through the security scanner (X-Ray) then had to come back and join the line to check the bag in for a second time. Luckily there weren’t many passengers in line. While I was doing this I was also carrying the Duty Free Bag with the bottle of liquor inside it and in plain sight of the Jet Airways staff.

      So I checked in the bag and went to the Taj Restaurant to quench my thirst; well things really went wrong there, apparently for some Gandhi commemoration the bar was closed. I thought I was back in Sri Lanka where for any frivolous thing they close all the bars. Never mind survived on a cool fresh lime soda.

      When it was time for me to go through the security to board the domestic flight I had to put all my hand luggage again through the security… nothing new I guess. Then came the surprise they said “Sir you cant take wine in the plane, you have to put it into the main luggage” I promptly pointed out to the security guy that I am connecting from a International flight and that I did bring the bottle on board as hand luggage and I was told that it was allowed by the airline staff the time of boarding. “No sir it is not allowed in domestic flights” came the answer right back at me. Knowing not to argue with them went back to the counter. Then the fun started….. apparently the process was that they had to get my checked in luggage out of the cargo container put the bottle back in to the check in luggage then re scan the luggage through the X-Ray machine and so on. No drink can be worth all that trouble. They also agreed with me that the bottle might break in the luggage and I will have to wear a whiskey perfume during my stay in India.

      So I was on the verge of throwing the bottle down the drain when one of the assistants who help with the luggage suggested to the girl at the counter to check the bottle in as a separate piece of luggage. That was funny; I had a grin in my face because it sounded ridiculous. But guess what, he got a small box put the bottle in, taped it up, put fragile stickers on it, and got the girl to weigh it. Guess what, the scale returned a value of zero kilograms. I thought now they are going to make a fuss again, but to my surprise no they checked in a weight of 2 KG the minimum weight of a check in luggage (Good to know I thought) and gave me a baggage tag. So I thought this is all going to be a waste as the bottle is surly going to break. So deciding to ignore a package with a streak of whiskey behind it at the Hyderabad Airport baggage belt went through the security and got in to the boarding area.

      Then came the next surprise, the flight was delayed for two and a half hours. Man now I know why they don’t allow liquor in the domestic flights as they are apparently always delayed and they don’t want disgruntled customers having a few to get over their frustrations of having to wait for an eternity. Well that is the consensus of the few guys I got chatting to.

      Finally the plan did arrive and I made it to Hyderabad. Went to collect the luggage and to my surprise the small box did make it intact. When I saw that it brought a grin to my face so get to the hotel and yes had a drink and went to sleep. So now from tomorrow morning I will be busy with the assignment. Looking forward to it.

      INSPIRING DESIGN DETAILS LOOKOUT HOUSE

      Inspiring Design Details

      Inspiring Design Details

      The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

      As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

      Inspiring Design Details Rest Room

      Inspiring Design Details Rest Room

      Inspiring Design Details Dining Room

      Inspiring Design Details Dining Room

      Inspiring Design Details Kitchen

      Inspiring Design Details Kitchen

      Inspiring Design Details Bedroom

      Inspiring Design Details Bedroom

      And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

      Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

      Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

      However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

      Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
      when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

      I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

      I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

      I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

      The “Welcome” Section of VideoStudio
      (Click to see Full Size)

      Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

      The Corel VideoStudio X10 Preferences Window
      showing the Default Startup Area/Section which is shown when the program starts
      (Click to see Full Size)

      A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

      Example of Corel VideoStudio x10 Starting Up In The EDIT Section
      (Click to see Full Size)

      Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


      [VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

      Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

      ~Troy from The Game Tips And More Blog


      [I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


      Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

      Modern Side Table Lamps Design

      If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

      If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
      Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

      Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
      Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
      Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

      In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

      [In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

      In One Sentence™


      A Battlefield Hardline

      Main Weapons Overview


      By: The Game Tips And More Blog


      Presented in a Document-sorta-but-not-really format

      I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


      Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

      Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

      The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

      I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

      Rating Key (if applicable to weapon, when used):

      ? = Not sure [yet] if they are Criminals-only or Cops-only usage

      * = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

      ** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

      Scout Elite = A fairly fast-shooting and silence-able sniper rifle with medium-high damage, this Default Professional weapon only improves with Unlocks. **

      R700LTR (Cops) = A slow-firing but powerful killer that is silence-able, Magnum Rounds can be Purchased after 50 Kills to make Vehicles cry. *

      AWM (Criminals) = Feeling much slower than the Scout – but also seeming more powerful – the first thing I would want to unlock is the silencer for this big boy.

      388-Recon = Feeling like it has decent ‘punch’ and good range – if the Scout is “fast” and the AWM is “slow” then the 388-Recon is “middle-of-the-road”, in terms of rate of fire, it seems. *

      .300 Knockout = What was once a fast and sleek one-hit-kill-machine, worthy of its’ lengthy and difficult Unlock, this rifle has since been Nerfed™ with a slower firing rate and its’ one-hit-kill ability taken away – and while still powerful and silent, to those who used it in it’s former glory, it is now a slow and decrepid version of it’s former self.

      AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

      M98b = This bolt-action sniper rifle packs a mean punch – it has so much power it can shoot pilots inside helicopters [I’ve done it! Once! lol] and has very little bullet drop-off – it can even be silenced, but it can it ever be equipped with a Straight-Pull Bolt (to allow you to shoot again without going out of scope) and its firing rate is pretty slow.

      M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

      SOCOM16 (Cops) = A medium-damage semi-automatic rifle that can be silenced, it feels somewhat inaccurate – but it does have the ability to fire quickly.

      SR-25 ECC (Cops) = A semi-automatic rifle that can be silenced, its decent damage along with its fast firing rate will make this a formidable weapon to use, if the medium-low recoil (which feels less than the SOCOM16) can be accounted for. *

      M82.416 = Even though the firing rate of this un-silenceable rifle has been severely reduced since I last played with it in Hardline (with the ability to fire a number of times a second back then), it remains quite the hand cannon (firing about once every second now) – with so much power there is very little bullet drop (and it can still take out pilots inside helicopters) – I think it did more damage back then too, but it is still nice to use for the sense of power it brings. *

      RO933 M1 = A silence-able rifle that seems to be able to fire as fast as you can click, I like to run this one with an Infra-vision scope, hide in the bushes – and let the bullets fall like hail upon the enemy from the shadows. **

      SAIGA .308 = A fast-firing rifle, this one ‘feels fun’ to run with even though it is a little inaccurate, because it has decent damage output. *

      PTR-91 = A rifle with mediocre damage, its’ fast fire rate can make up for it, if the medium-ish recoil can be compensated for.

      SP-AR = Although fast-firing, this rifle isn’t very accurate while doing so, with its’ high recoil – at least it as a neat, unique ‘report’ [sound].

      M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

      Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

      MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, staying on the edges of the area, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

      M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).


      RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

      M110K5 = [N/A, Haven’t Unlocked yet sorry]

      1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

      MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


      SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

      A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

      G18C = Although fast-shooting, this pistol feels a little inaccurate.

      93R = With good accuracy and higher damage, this little bad boy can even be silenced, eventually. **

      MAC-10 = While the recoil will have you shooting at the sky for the most part, this little guy will spit out bullets and damage faster than a shaken baby spits out broken teeth to make up for it – it’s just that you may be out of ammo before the enemy dies.

      MP9 (Cops) = Surprisingly accurate if you can compensate for the recoil, this little fella doesn’t have much in the way of scopes, but it can be silenced after 90 kills. **

      TEC-9 (Criminals) = Although fast-shooting, this little guy isn’t the most accurate puppy in the litter (but if you use the sights it does help) – it also doesn’t do the greatest damage, it seems.

      IMPROVISED GUN = With decent damage output, decent accuracy and a nice ‘feel’ to it, this little fella is fast becoming a Personal Favourite. **


      DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

      T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

      TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

      FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

      G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

      870P MAGNUM = Although this is a slower-firing pump-action style shotgun, it has very high damage output and a little bit of range, too. *

      SPAS-12 = While still a pump-action shotgun, the SPAS-12 fires faster than the 870P MAGNUM and it feels like it has a bit more accuracy, too – it just doesn’t do quite the damage of the 870P.

      SAIGA-12 (Criminals) = With a nice rate of fire, it feels like it does damage somewhere between the SPAS-12 and the 870P MAGNUM. **

      STAKEOUT (Cops) = With damage a bit lower than the 870P or the SPAS-12, shotgun ‘feels’ quite a bit more accurate – and with its’ nice rate of fire (for a pump-action), this beauty quickly became a Personal Favourite to run with. **

      M4 (Criminals) = With a nice rate of fire and decent damage, this cannon is quickly becoming a Personal Favourite. **

      KSG12 (Cops) = Although a pump-action shotgun, this thing hits like a horse’s hoof to the head – I dubbed this cannon the “Kiss The Ground” shotgun right away. **

      1887 = Although powerful, this old-west-style shotgun shoots slow – when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

      DOUBLE-BARREL SHOTGUN = A true source of unearthly power once unlocked, the DOUBLE-BARRELLED SHOTGUN will make you feel like a living angel of death, as even one barrel’s worth will end an enemy close by; just point this finger of god at an enemy and say “die” – and as long as they aren’t too far away – they will do it for you. Worth the effort to Unlock and a Personal Favourite. **

      SA-58 OSW = I call this “The Recoil Machine”, as unless you fire one bullet at a time, you will be covered in rifle Recoil.

      SCAR-H (Cops) = This silence-able machine gun has some recoil, but it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (especially if ‘tap-shooting’ for short bursts). *

      FAL (Criminals) = Although this rifle has a fair amount of recoil, it seems to have high damage output – if it can be compensated for, this could be a nice heavy-hitting weapon to run with. **

      HCAR (Cops) = With a medium amount of recoil, it “levels out” and can be compensated for, allowing you to enjoy the high damage output and decent accuracy (even during continuous fire, if you can control the muzzle). **

      HK51 (Criminals) = Although it has a bit of recoil, this silence-able rifle has a nice ‘smooth’ feel to it. **

      SG510 (Cops) = With a nice feeling of accuracy (aimed fire, with recoil compensated for) it also feels like a decently-hard-hitting weapon – this could be a new Personal Favourite for me. *

      M39 EMR = With a little less accuracy than the other Battle Rifles, the M39 EMR ‘feels’ a bit smoother though, with a nice rate of fire and the ability to be silenced – it’s just too bad it doesn’t have Extended Magazines available, as it always feels like it’s running out of ammo just a tad too soon. *

      M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

      Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

      MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **

      RO933 BLK = [N/A, Haven’t Unlocked Yet, sorry]

      AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

      M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

      MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



      SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

      A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

      45T = This pistol doesn’t seem to do much damage, nor does it shoot very fast – but that slow rate of fire gives it decent accuracy.

      .40 PRO (Criminals) = While this pistol is decently accurate, it only does mediocre damage and it doesn’t fire very fast – another enemy will probably kill you before the one you are shooting at dies, unless you ‘get the drop on them’.

      M1911A1 (Cops) = While it doesn’t shoot very fast or do above medium-ish damage, this WWII-era pistol seems to be decently accurate – but it will win no awards.

      BALD EAGLE = With huge damage output, this ‘Hand Cannon’ will feel like you are wielding a hand-size shotgun – too bad it can’t be silenced or have longer scopes put on it. *

      T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

      TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

      FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

      G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

      DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

      MP5K = Fast-shooting and if you can compensate for the recoil, pretty accurate – it even works great silenced. *

      M/45 (Cops) = Not as ‘smooth’ handling as the MP5K, this SMG feels ever-so-slightly more accurate and has decent damage, to boot. *

      MPX (Cops) = A fast-shooting and fun smg to run with, it seems to have a little less recoil than the other SMGs but doesn’t ‘feel’ as accurate, if that makes any sense – it is still pretty good and if you are able to compensate for recoil, a nice gun to use. *

      K10 (Cops) = Insanely insane with an insane firing rate, it has been literally only for the insane since the Beta – and maybe those who don’t like keeping bullets in their gun – heaven help anyone if you point this at their head. **

      FMG9 = Suppress-able at 90 kills, this fast-shooting SMG ‘feels’ more accurate than its’ kindred, especially after unlocking the Laser Sight and some Scopes – and with a unique stock animation, it is a ‘fun’ weapon to run with. *

      M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

      SCORPION = A fast-shooting gun (almost as fast as the K10 it seems), this silence-able fella ‘feels’ ever-so-slightly less maneuverable than its’ brethren – and it does a bit less damage, too – otherwise, it would have been a Personal Favourite (I have almost unlocked the Suppressor already on it). *

      Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

      UMP45 (Criminals) = Although slightly more accurate feeling, it also feels like it shoots slower and hurts a little less than similar weapons.

      UMP9 = Silence-able after 70 kills, this SMG ‘feels’ a little bulky to wield, but seems like it does a notch more damage than its’ counterparts. *

      UZI (Criminals) = Silence-able but unfortunately “The Uzi” in-game seems different than it does in the movies – it shoots far slower than on the big screen, but it is also more accurate here. *

      M5 NAVY (Cops) = Making you feel like you’re in your own 80’s movie, the M5 NAVY packs a punch and seems to keep accuracy even out to mid-ranges (aimed or not) – quickly making this a Personal Favourite. **

      M12S (Cops) = “The Spaghetti Uzi” ‘feels’ ‘clunky’ and a ‘bit’ ‘inaccurate’ to me, ‘but’ it seems to have a ‘few more’ bullets than ‘similar weapons’, which ‘mostly’ ‘makes up for it’, quote marks. *

      AUG PARA (Criminals) = While this Criminal-only SMG ‘feels’ like it does decent damage and is fairly accurate, it ends up being only ‘mediocre’ in… well.. Everything.

      MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them, until it shows up on the Kill Log… **

      MX4 = Although very ‘average’ in all stats in-game, the stylish MX4 ‘feels’ like it is an efficient damage-wielding gun that is fun to use for some reason – I just kept on using it, eventually unlocking almost everything I wanted in each Attachment category, despite losing many shootouts with it.

      M1 = The World-War-2-era M1 is a unique rifle that is fun to play and easy to use, with its’ high accuracy and unique report [sound] – if only it could be scoped (and silenced).

      RO933 .300 BLK = [N/A, Haven’t Unlocked yet sorry]

      M110K5 = [N/A, Haven’t Unlocked yet sorry]

      1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

      AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

      M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.


      MAMMOTH GUN = [N/A, Haven’t Unlocked yet sorry]


      SYNDICATE GUN = [N/A, Haven’t Unlocked yet sorry]

      A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

      .38 SNUB = Seen in almost any cop movie between 1970 and 1990, this little guy fires fast, ‘moves’ smoothly and is nice and accurate – but it better be because you only get five shots to work with – and there are hardly any add-ons for it at all. *

      .44 MAGNUM (Criminals) = The Classic is here, from Movies to Real Life mayhem, the “fourty-four” is a hand cannon of damage to all it gets pointed at, nuff’ said. *

      .410 JURY = While not the fastest firing, this little bad boy is literally a hand-size-shotgun (it fires small shotgun-style shells) and since it is smaller than the Fourty-Four and The Eagle – but seems to blast out the damage even out to close-to-medium ranges – this weapon is fun-as-hell to run with. A Personal Favourite. **

      .357 RS (Cops) = While still a “magnum” like The Fourty-Four, it doesn’t seem to do quite as much damage – or have the range the .44 MAGNUM has – but it has a bit more ammo at 8 rounds.

      T62 CEW = Only one word for this one-hit-disable, “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

      TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

      FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

      G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever. **

      DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

      R0933 = With a high rate-of-fire and equipped with a few little add-ons ‘out of the box’, the RO933 ‘feels’ smooth and easy-to-use, even if it isn’t the fastest killer. *

      AKS74U (Criminals) = With a notch up in damage and a couple notches up in accuracy from the RO933, the AKS74U ‘just feels right’. **

      G36C (Cops) = Having not seen a “G36C” myself since BF3, this felt like it’s ‘little brother’ – a ‘smooth’ to maneuver with, compact, pretty accurate gun. *

      SG553 (Cops) = With the highest average in-game stats than the other Carbines, this weapon should “kick criminal butt” – and that, it does (especially with some Add-ons). A Personal Favourite.**

      CAR-556 = Packing a wallop of hit damage and feeling pretty accurate, even at range in short bursts, I have no idea why I can’t ‘get into’ using this gun more – perhaps it is the ‘harsh’ sound it makes? LOL *

      ACWR = While the in-game stats show it as fairly inaccurate, I found the ACWR to do decent damage, ‘feel’ smooth to use – and do a nice bit of hurt to the enemy (even at range if you can compensate for the bit of recoil). *

      AKM (Criminals) = If you can deal with the huge amount of recoil this gun has, it does seem to have a pretty accurate, crazy-damage, first shot and high-damage short bursts – other than that, it is actually ‘average’ in all stats, in-game.

      M16A3 (Cops) = Accurate and with a fast firing rate, silence-able and reminiscent of “movie M16s”, there isn’t much to not like about this weapon. A Personal Favourite. **

      M416 (Criminals) = This carbine ‘feels’ like it handles a lot smoother than the AKM, feeling more accurate as well, even though the in-game stats are comparable.

      ARM = [N/A, Haven’t Unlocked Yet, sorry]

      L85A2 = With a bit of recoil already, it is accentuated by the pre-loaded 4X scope it comes with – but if you are just ‘runnin-and-gunnin’ with it, it feels like a formidable weapon up close – it just seems to have accuracy problems (bullet spread) at anything other than point blank range.

      MDC (Cops) = With what seems like a high amount of recoil and inaccuracy, the MDC doesn’t seem to live up to its’ stylish look – it ‘feels’ a bit worse than the L85A2, in regards to ‘handling’.

      FAMAS = While quite inaccurate if you just ‘spray-n-pray’, aiming seems to help a lot with this rifle – it ‘felt’ a lot better too, after Unlocking the Extended Magazine – and it seems like it could only improve from there.

      F2000 (Criminals) = This huge wall of metal feels like you are carrying a rocket launcher, but with its’ fast firing rate and decent accuracy, there’s not much to dislike about it – other than it doesn’t seem to ‘hit’ as hard as I would have expected . *

      SAR-21 = In-game, the stats on this weapon are very ‘average’ – and it ‘felt’ that way, except for the accuracy which, especially if you can compensate for it, seems ‘high’, actually – and it only seemed to get better as I Unlocked more Attachments. *

      RPK (Criminals) = With a large magazine size (50) and how this gun ‘feels’ heavy-hitting, while a bit inaccurate at first, I think it can be a formidable weapon after some Unlocks.

      RPK-74 = While comparable to the RPK (of course), the ‘74 ‘felt’ a little more accurate, actually. *

      AUG A3 = The AUG A3 already ‘felt’ pretty accurate, but with ‘included’ 4X scope and if you can compensate for the recoil, it is a pleasure to shoot – too bad it doesn’t seem to do high damage (but about a ‘medium’ amount). *

      M1A1 = Although it can never be silenced and therefore will always give your position away when you fire, you probably wouldn’t want to silence this variation on the “Tommy Gun” as it is a pleasure to listen to the unique, heavy-hitting sound this World War 2 staple makes – it is slow to reload but has a decent firing rate and decent punch. *

      Mp7 = Although this silence-able PDW shoots very fast, you have to be in Close-ish Range or else you’ll just be burning through your ammo.

      MP5SD = This pre-silenced SMG is fun as hell to use, with its’ fast firing rate, good accuracy and decent damage; I like to run this with an IRNV scope and Extended Magazines, never letting the enemy know what is raining bullets down upon them until it shows up on the Kill Log. **


      M110K5 = [N/A, Haven’t Unlocked Yet, sorry]



      1887 = Although powerful, this old-west-style shotgun feels slightly slow when compared to its’ modern-day counterparts – but it is fun to spin it end-over-end a’la Terminator 2 style to reload, once you unlock the ability to Saw Off the Stock. *

      AWS = A pre-silenced but slower-shooting, medium-to-long range rifle, with what feels like medium-ish damage, even though the in-game listing has it as “high damage” –  perhaps this one gets better after a few Unlocks, it felt pretty under-powered and a little inaccurate to me (but this could be the slower bullet speed due to the built-in silencing barrel).

      M1903 = This World-War-II-era rifle, reminiscent of Saving Private Ryan, comes ‘pre-loaded’ with a Straight-Pull Bolt (allowing you to shoot again without going out of a scope, which Unlocks in 20 kills) and can eventually Unlock a Silencer after 50 kills – but even though I read it is supposed to be powerful against vehicles, it shoots a little too slow and does too little damage to infantry, for my personal liking – maybe you’ll have better luck with it.

      MAMMOTH GUN = [N/A, Haven’t Unlocked Yet, sorry]



      SYNDICATE GUN = [N/A, Haven’t Unlocked Yet, sorry]

      A-8s = With only one arrow to fire and a looong reload time, the “Harpoon Gun” can still be a blast to play with, as it is fun as hell to kill someone with this unique weapon that won’t make you show up on the mini-map at all – it is just that you will probably die too (while reloading). **

      92FS = Silence-able but not the fastest-shooting pistol, nor the most damaging – it does seem accurate though, if you can compensate for the recoil – maybe it would become something worthwhile after some Unlocks.

      P226 (Cops) = Although fairly fast-firing, it is somewhat inaccurate – I would say it is the ‘slightly faster but less accurate version of the Criminals-only CZ-75’ if I had to compare it.

      CZ-75 (Criminals) = Although fairly accurate, it is somewhat slow-firing – I would say it is the ‘slightly slower but more accurate version of the Cops-only P226’ if I had to compare it.

      G17 = Nicely accurate and firing as fast as you can click, it seems, the G17 became an instant Personal Favourite. **

      FN57 = While this little guy shoots fast, it doesn’t seem to do a heckuva lot of damage – getting fast headshots makes up for it though. *

      G17 Race Pistol = A great little dealer of damage, it can shoot as fast as you can click – too bad there are no options for scopes or silencers whatsoever (other than the red dot sight it comes with). **

      T62 CEW = Only one word for this one-hit-disabling “non-lethal” (it counts as a ‘kill’ for Patches and Assignments) weapon that makes all others respect your authority: Fun. **

      TRACKING DART = The Tracking Dart is mainly for ‘tagging’ opponent vehicles so that they can be seen by literally everyone – and RPGs will ‘lock on’ to them too – it even works on people! *

      DUAL VZ.61 = Holding two of these “Czech Uzis” akimbo, you will feel like you are in a John Woo movie – only the inaccuracy will force you to run up close to everyone – but it will be fun doing it. *

      M67 FRAG = With decent range, ‘The Poison Apple’ does huge damage – I think it’s killzone has been increased since Beta – a room-clearer (as long as they are in line-of-sight), but you only get one. *

      M18 SMOKE = While it doesn’t damage anyone, it does provide some good ‘cover’, as it blocks not only seeing people but also spotting.

      M84 FLASHBANG = While sounding very useful at first, with the faster pace and highly mobile opponents in the convoluted spaces of Hardline, having an effect with this is rare – although I have had it used on me and have seen people not able to see well for the short time it is in effect (looking around or shooting aimlessly) – it is very rare to be helpful it seems, but it happens.

      GAS GRENADE = Quite useful, as it blurs the view of the enemy (affecting their aim as well) and sometimes a killer (albeit slowly) – unless you want to be affected yourself, put on a Gas Mask Gadget. **

      INCENDIARY GRENADE (Cops) = Create your own “Napalm Pond” with this grenade-of-fire, which has a good range and good ‘spread’ (the area of effect is fairly big) – the only drawback is that people have to stay in it for a bit to die and some could have Fire Resistance Masks to nullify it (but that is only the Operator Class and only if they have the Robbery Expansion/DLC). *

      MOLOTOV (Criminals) = The ‘homemade’ version of the Incendiary Grenade, it has the same area of effect and does the same damage, it seems – and could be nullified by the FR Mask (but as above, that is only the Operators and only if they have the right Expansion/DLC). *

      THROWING KNIFE = Slightly slower to deploy and slower to travel than expected, these types of knives are fairly heavy [in real life, I used to own one when I was younger] so they have some drop to account for; but your opponent will die when one knocks them over, making these little guys fun as heck to use. **

      BASEBALL BAT (Criminals?) = No matter where you grew up in the world, you will know how to wield a wooden stick – which means this guy can come out fast and keep on swingin’ – do it from behind for a Takedown. *

      POLICE BATON (Cops) = A staple of Authority worldwide and resembling the Japanese ‘Tonfa’, this bad boy will knock out a perp in two hits if you don’t take him down from behind. **

      NIGHTSTICK (Cops) = Like a Police Baton without the little handle, the Nightstick feels fast to use, if a bit mundane to look at.

      BLACKJACK (Cops) = Although still small and slim, this little guy feels ever-so-slightly slower than the other ‘sticks’, for some reason.

      COLLAPSIBLE BATON (Cops) = I had no idea there would be such a long delay to deploy this little fella, since he’s so short…but don’t worry he becomes longer.

      SHOVEL = As a farming tool, I feel that it has a sufficiently-long delay time to whip-it-out… and that’s enough double entendre for now.

      GOLD CLUB (Criminals?) = Feeling like it wields ever-so-slightly slower than say, a baton or bat, it is still wicked fast – and you can do a non-lethal takedown (from behind), to Interrogate the enemy (finding out their positions on the map). *

      LEAD PIPE (Criminals?) = Quick to draw and with a somewhat-satisfying ‘clunk’ when you hit an opponent, this guy is fast becoming a Personal Favourite. *

      SLEDGE HAMMER (Criminals) = Slow and heavy to draw, this baby packs a mean punch once it does show its’ presence on the battlefield – a one-hit kill, it also takes down doors and crumbles thin walls with ease. *

      BREACHING HAMMER (Cops) = The lawful version of a Sledgehammer, this big boy is also slow and heavy – but it forces others to ‘respect your authoritah’ once drawn as it one-hit-kills and takes down doors and thin walls with ease. *

      CROWBAR (Criminals?) = If you’ve lived in any industrialized country for a time, you know what a crowbar is and what it can do – and while not seeming quite as quick-to-deploy as say, a bat or a baton, the muffled ‘donk’ sound it emits when hitting someone makes this weapon a pleasure to work with. **

      KNIFE = Fast and deadly, nuff’ said.

      SHANK = A weapon born out of necessity, the Shank is fast and deadly and other speedy and dangerous words… you get the point – or rather, they will. *

      BOWIE KNIFE = This classic weapon, interestingly named after an owner (not its designer) feels ever-so-slightly slower than its’ other bladed brethren.

      CARBON FIBER = Although sleek and stylish looking, there is an ever-so-slight delay to deploy this bad boy – but it does seem to have a unique takedown animation that can happen.

      SCOUT = A fast knife that will cover your hands in blood if repeatedly wielded in a cluster of enemies.

      SEAL = It feels ever-so-slightly slower than say, the Scout Knife, but it is still ‘wicked bad’, as it should be.

      SURVIVAL = With an animation similar to the Bowie from the back and a seemingly-unique kill animation from above [that I have seen so far], this knife works well, even if it does seem ever-so-slightly slower than the other knives, for some reason.

      TRENCH = With a ‘side animation’ similar to the Shank and a ‘front animation’ similar to the Bowie [that I have seen so far], the look of this fella makes it a touch more satisfying to kill with. *

      ACB-90 (Criminals?) = With side-killing animations similar to the Shank and rear-killing animations similar to the Bowie [that I have seen so far], it does seem to deploy pretty quickly. *

      DEVIL’S TOOTHPICK = The motions for using this ‘asylum invention’ on people are more ‘hectic’ and seem to shout “mayhem” (you stab less and hack more, it appears).

      FIRE AXE (Cops?) = Live out your Team Fortress 2 “killing people who make W+M1 jokes” Pyro urges, or perhaps your childhood dream of being a “Firemans” (or a “Firelady”) with this slow-to-wield but ‘kick-axe’, axe. *

      MACHETE = This traditional and practical knife seems to deploy quite slowly – although it does great damage and appears to kill in one hit [so far].

      CLEAVER = While not as slow to use as say, the Machete or Axe, it is still “medium-slow”, a lethal takedown (even from behind) – but it doesn’t seem to have any ‘unique’ animations [that I have seen so far].

      KARAMBIT = Fast and Deadly, there really is nothing else to say about this ‘little devil’ other than those two words – really, I’m not just being lazy here. *

      INQUISITION SWORD = Slow and Heavy to wield – but a one hit kill as you overpower your foe – be sure to shout “There Can Be Only One” in real life when you use it for maximum fun-ness. **

      When the Betrayal Expansion was released in March of 2016, a Battlelog Post stated: “Now that various weapons have been released to all classes with the base game update, you can pair a Mechanic with a sniper rifle, or an Enforcer with an SMG. You might not be as effective as you would with your class weapon, but the option is there.” Meaning, if you are utilizing a Weapon that is normally ‘outside’ of your Class, you will be using it with reduced effects!

      Again, as stated above, I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. ‘slow and hard-hitting’ or perhaps ‘fast-shooting with lighter damage’, and so on) – hopefully this information will help you out in some way. Enjoy – get in there for the Double XP Event on now – and See You In The Game!

      The carbohydrate jewels

      By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

      Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

      Diet Start

      Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

      They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

      They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

      Life is a balancing act

      So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

      The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

      Why Teachers Love Technology

      An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

      What do we Know Infographic
      Graphic from OnlineUniversities.com

      Do you love technology? I’d love to hear why in the comments section!

      Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

      Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

      See You In The Game!

      Getting Started with a Flipped Classroom

      Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

      1. Plan your lessons 

      a) Does it make sense to flip?
      You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

      b) What content must be covered?
      I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

      c) Am I the best person to deliver the content?
      Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

      2. Choose your tools

      Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

      a) Screencasts
      Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

      b) Whiteboard apps
      Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

      c) Paper slide shows
      I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

      3. Choose your platform

      Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

      4. Share your content

      Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

      Bonus Tips

      1. Make your videos in batches. 
      I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
      2. Start small.
      Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
      3. Divide and conquer.
      See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
      4. Get some cheap .mp3 players for student check-out.
      Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
      Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

      Workout Anytime on FOX 19

      Workout Anytime on FOX 19

      Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

      Cincinnati News, FOX19-WXIX TV

      You can view the full segment here.

      And More: Deals and Sales – End Of The Month Specials (February)

      The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

      Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

      Sniper Elite Nazi Zombie Army Sale Page
      Sniper Elite Nazi Zombie Army 2 Sale Page

      also on sale
      Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
      Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
      Alternativa is on sale for only $1.29 (90% off)
      The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
      Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
      Moto GP 13 is $12.00 (70% off)

      Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

      (click image to see Full Size)

      also on sale
      Bioshock is $4.99 (75% off)
      Bioshock 2 is $4.99 (75% off)
      Bioshock Infinite is $9.99 (67% off)
      Borderlands, Game Of The Year Edition is $7.49 (75% off)
      Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
      Duke Nukem Forever is $4.99 (75% off)
      Civilization V is $7.49 (75% off)

      GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

      (click image to see Full Size)

      also on sale
      Call of Juarez: Gunslinger is $9.72 (46% off)
      with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
      Sniper Elite V2 is on sale for $7.50 (75% off) or get the
      Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
      The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
      and last but certainly not least
      The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
      Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

      Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

      My Trip to Manila, Philippines

      The assignment in the Philippines is to review a Strategic Plan which has been developed with the assistance of another consultant. On first glance of the plan it was not constructed in a logical way. The SWOT analysis was not used to look at strategic options. The whole plan is just a list of SWOT elements and clubbing of current activities in to 12 areas of work and finally selecting 6 areas which they call strategies and allocating opportunities and threats that are relevant to these selected 6 areas. They have not used the strengths and weaknesses.

      The previous consultant does not seem to have a grasp of the logic in strategic planning; the need to start with the external factors that influence the organization and then move inside the organization.

      The staff of the organization also seems to be very new to planning let alone strategic planning and have an aversion towards prioritizing and selection. As usual they seem to want to do everything. So all in all the previous plan does not have a logical flow as well as the choices the organization has made in order to mobilize resources and achieve the mission.

      My task of reviewing the strategic plan was made a lot more difficult as there were representatives from a funding organization who along with the staff thought they knew everything and in reality they “did not know what they did not know”. I some times wonder why they hired an expert if they think they know everything.

      They are more interested in retrofitting “logic” in to the current plan! Go figure! In effect they want to create a strategic plan breaking all the rules. I had a tough time to pull them into the right path. It seems that the organization/staff are not willing to change their current operating mode of adhocracy to a more strategic, structured logical way. So I explained that until the willingness to change is there the strategic plan will continue to be just a piece of paper.

      Now I have to do the documentation. Hope to finish it as soon as possible. Looking forward to returning to Colombo; Manila is too noisy for me and for some strange reason I do not seem to like Manila. Well I have finally found a city that I do not like.

      Guided Math Resources

      I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

      First, is this book:

      Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

      We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

      You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

      We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

      There was also a parallel task where students could choose how to represent the data.

      The set of data below describes the ages of a group of people at a family party.

      32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

      Choice 1: Create a line plot to display the data. 

      Choice 2: Create a bar graph to display the data. (p. 186)

      Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

      This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

      Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

      Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

      Have a great weekend!

      April Nitzsche on WBIR Knoxville

      April Nitzsche was recently on WBIR as part of their Workout Wednesday. In the segment April demonstrated some exercises you can do at home and in the gym with kettle bells for a good workout. She also mentioned the new Maryville opening location as well as the Bearden location.

      You can also view the video here.

      good representation of the concepts

      WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

      WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

      Mercy Health’s new hospital could be economic boon to township
      By: Kurt Backschneider

      GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

      Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

      Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

      (Read More)

      WORKOUT ANYTIME on WFMY News 2

      WORKOUT ANYTIME on WFMY News 2

      The WFMY News team had WORKOUT ANYTIME Franchisee Jeff Cook on the show to talk about how to do explosive exercises in just a few minutes each day. Mary Anne Mills from WORKOUT ANYTIME was also on the show from WORKOUT ANYTIME and they went through 4 different exercises that can be done at home to burn calories fast. In the next segment Mary Anne and Jeff went through exercises that show moms how they can work out while being pregnant. Mary Anne goes through exercises that build up endurance for labor and how to keep off weight while some moms “eat for two”. They went through the different cardio machines that keep the baby safe and go through a donkey kick exercise. Lastly, the station mentions where the WORKOUT ANYTIME is located in Greensboro and how to get more information on personal training sessions.


      You can view the full segment here. 

      Speedrun – Hitman: Absolution – Contracts (The First Hit)

      After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

      Level: Hitman (Absolution) – Contracts (The First Hit)
      Time: 21 seconds
      Score: 95,186
      Runs: About 4-5

      After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

      Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

      Good luck with it and See You In The Games!

      My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

      This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

      Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

      Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

      However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

      So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

      I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

      MODERN ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      Here is a mesmerizing seeks two-bedroom apartment with contemporary charm of events celebrating the beautiful Scandinavian style. The trough has two bedrooms and a kitchen year covers an area of ​​74 square meters. According Alvhem open plan living, social nucleus in apartments with high ceilings, walls painted in immaculate white, the beautiful oak floors and large windows. Splashes of color brighten the interior and seats with the elements that seem inviting visitors screaming. The kitchen island of brass with a thick sandstone table creates a social atmosphere that is sure to make any cook happy. The table has a sink sub-pasted from Blanco, who is both stylish and practical. From the terrace one has a spectacular view of the beautiful area and a perfect place for relaxation. What an inspiring use of space for a modern two-bedroom apartment!

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

      Fabulous Fiber!

      Everyone has heard that they need to eat fiber, but few people really know what it is and why it is so important.     Fiber is a form of carbohydrate along with sugars and starches.      Unlike sugars and starch fiber cannot be used for energy because it cannot be broken down into sugar.     Starch and sugars both end us as blood sugar aka glucose.
      Starches are simply multiple units of sugar hooked together, and we have enzymes that break them apart so we can use the sugar for fuel.   Fiber is also multiple units of sugar hooked together, but humans lack the enzymes necessary to break it down into sugars so it is not absorbed.    This is very important when thinking about carbohydrate containing foods because they are NOT all the same.
      For example, a glass of fruit juice is essentially a glass of sugar water with some beneficial plant chemicals and in many cases a nice dose of vitamin C.    It can dramatically boost blood sugar, and if you consume too much it can definitely drive weight gain.     While a large serving of brocolli is mostly fiber with little sugar and starch and is also chock full of beneficial plant chemicals, but with almost no effect on blood sugar!
      There are two main types of fiber – soluble and insoluble.    Ideally you want to eat both.   There is also a third type of fiber called “Digestive Resistant Starch” (see https://workoutanytime.blogspot.com/2017/10/digestion-resistant-starch-all-starch.html)
      Soluble fiber, found in foods such as cucumbers, blueberries, and beans, has a gel-like consistency and slows down your digestion.     This helps with satiety (feeling satisfied).    It also slows the break down and absorption of cholesterol and other nutrients like starches and sugar which can help lower cholesterol and control blood sugar.    Some foods with soluble fiber also help feed the good bacteria in your digestive tract.
      Insoluble fiberis found in foods like green, leafy veggies, green beans, and celery.    It does not dissolve to a gel and stays intact as it moves through your colon.   By adding bulk, it helps food move more quickly through your digestive tract reducing transit time.  Insoluble Fiber is sometimes referred to as “roughage”, and it along with soluble fiber can help with constipation.
      Benefits of High Fiber Intake
      Fiber intake is very important for keeping blood sugar levels under control, and studies have shown that people who take in at least 26 grams of fiber per day had a much lower risk of developing Type 2 Diabetes.
      There is also an inverse relationship between fiber intake and heart attack, with research showing that people eating a high fiber diet have a 40 percent lower risk of heart disease.    High fiber diets may also help lower blood pressure.
      Another interesting research finding about fiber is that for every 7 grams of fiber you consume each day your stroke risk is decreased 7 percent.      To put this into perspective this equates to about 2 servings of fruits and vegetables.
      Fiber, and psyllium in particular, can help move yeasts and fungus out of your digestive system which may help prevent them from triggering acne and rashes.
      Fiber can also provide relief from irritable bowel syndrome in many people.
      Fiber intake may also help reduce the risk of gallstones and kidney stones probably through its action in controlling blood sugar.
      Sources of Fiber
      Contrary to popular opinion grains are probably not your best source of fiber.    Unfortunately, non-organic grains are chock full of glyphosate which is pesticide banned in most other countries outside the US because they have no allegiance to Monsanto who produces it.    
      A high grain diet promotes insulin and leptin resistance thereby increasing your risk for Type 2 Diabetes, Heart Disease and Cancer. 
      Better choices of fiber includes Organic Whole Husk Psyllium.     If you use this supplement it is critical to get organic psyllium as non-organic psyllium is heavily sprayed with chemicals.     Other great sources include chia seeds, berries, root vegetables such as sweet potato, peas and beans, mushrooms, broccoli, cauliflower, Brussel sprouts and celery.
      How much fiber?
      Experts recommend that woman eat a minimum of 25 grams of fiber per day and men consume 38 grams per day.     However higher intakes may be more beneficial.     
      It is important to SLOWLY increase your fiber intake and keep your water intake high to prevent potential issues caused by eating fiber without sufficient fluid.
      Low-Fiber Diet
      There are circumstances where high fiber intake is contraindicated and timing for fiber intake relative to drugs and supplements is important.   People with chronic digestive issues may need to remove fiber for some period of time because fiber feeds the bacteria in your gut.    Although as a general rule this is highly beneficial there are circumstances where high fiber intake can feed the wrong microorganisms such as pathogenic bacteria.

      Fiber can also bind certain medications and minerals dramatically reducing their absorption so many drugs and mineral supplements should not be taken at the same time as fiber.

      MODERN SWEDISH BEDROOM DESIGNS GO SROP

      Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

      modern swedish bedroom designs

      MODERN SWEDISH BEDROOM DESIGNS

      modern swedish bedroom designs

      MODERN SWEDISH BEDROOM DESIGNS

      modern swedish bedroom designs

      MODERN SWEDISH BEDROOM DESIGNS

      modern swedish bedroom designs

      MODERN SWEDISH BEDROOM DESIGNS

      modern swedish bedroom designs

      MODERN SWEDISH BEDROOM DESIGNS

      “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

      It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

      “Can You Guess Where The Screenshot Below Is From?”

      (A Game Screenshot Identification Contest)

      Having its’ Fifth Edition now, today – February 15th, 2018!

      All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
      below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

      1. Your guess for the game the image is from.
      2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
      That’s it!
      **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


      The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

      [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
      due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
      of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
      Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

      Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

      Can You Guess Where The Screenshot Below Is From – Contest #1
      Can You Guess Where The Screenshot Below Is From – Contest #2
      Can You Guess Where The Screenshot Below Is From – Contest #3
      Can You Guess Where The Screenshot Below Is From – Contest #4

      Are you ready? Here then, is the Screenshot image for this month, below:

      [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

      After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

      Update!

      A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

      Here is the HINT image (with enlarged portion revealed), below:

      [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

      At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

      Update!
      It has been two weeks since the Contest began and there have been no correct submissions! Aww….

      To end The Mystery, here is the answer for February’s edition of
      ‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


      The Answer for this month’s Contest was: Just Cause 2!
      [Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
      Click to see Full Size
      Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

      See You In The Games!

      [**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

      (The Game Tips And More Blog Contest Game #2018-02)

      Mt Trip to Manila, Philippines cont……..

      I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

      I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

      I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

      In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

      12 Days of Fitness with WORKOUT ANYTIME

      12 Days of Fitness with WORKOUT ANYTIME

      Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

      Week 1

      4 days of exercise

      2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
      2 days of body weight or weight training for 12 min per day
      Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

      Squats
      Push-ups 
      Walking Lunges
      Jumping Jacks
      Burpees
      Ab half roll backs (seated position, roll half way back, come up and exhale)

      Week 2 

      4 days of exercise

      2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

      2 days of body weight or weight training for 12 min per day
      Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

      Pop Squats
      Push-ups w/alt knee
      Forward Lunges with bicep curl
      Plank Jacks
      Mountain Climbers
      Ab full roll up (lying position, roll all the way up, and exhale)

      Week 3

      4 days of exercise

      2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

      2 days of body weight or weight training for 12 min per day
      Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

      Squat swing with overhead tricep press
      Spider-Man Push-ups 
      Reverse Lunge with bicep curl
      High Knees
      Shoulder push-ups
      Navy Seals (Ab exercise)

      Battlefield Play4Free – PlayTesting The AEK-971 Assault Rifle (One Full Round – Myanmar – Raw Gameplay [Unedited] Video)

      Battlefield Play4Free and The Daily Draw

      Just a quick primer for those that don’t know; Battlefield Play4Free is a Free-To-Play title, which means it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money. In this game, you do so by purchasing “Play4Free Funds” that you can then use in the in-game Store. There is also a nice feature offered where you can win ‘prizes’ (weapons, armor, clothing, etc) from a game called The Daily Draw at the main Battlefield Play4Free website. You can play once every day, choosing a card from a random draw of eight and the card you choose will be an item ‘underneath’.

      The items possible to win range from temporary one-day-use-only weapons and clothing, to seven-day-use ones, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future. The Daily Draw also gives a chance to win ‘Boosts’, where you can earn extra Credits [for instance], as seen in the screenshot below:

      The AEK-971 Assault Rifle

      I recently won the AEK-971 in The Daily Draw on my Assault class soldier and thought I’d try it out and see how it felt and quickly write a post about it [I call these ‘PlayTests’]. Now, I am not a gun expert or know a lot about the statistics of the guns, so I will mainly be discussing briefly here how the gun ‘feels’ and ‘plays’, especially compared to the default G3A4 Assault Rifle.

      The AEK-971 unlocks nice and early at Soldier Level 3, but the main reason for this seems to be that it isn’t supposed to be very different from the Default Assault Class Rifle. As you can see from the comparison above, which is the main Store/Inventory screen information for the weapons, the only real difference is the amount of damage it can do. It has the same accuracy rating as the G3A4, the same range, and the same amount of ammo in the mags. After winning it in The Daily Draw, I played a few rounds with AEK-971 and originally recorded a couple of full matches. Here is one full match, shared unedited for you [a ‘Raw Gameplay’ video], testing out the AEK-971:

      I was also testing out the Trial of CyberLink’s PowerDirector 12 for editing.
      A Review article about that application – with Tips – Coming Soon™!

      Despite not being listed as any more accurate than the G3, I felt more ‘capable’ with the AEK (as though I could ‘put up a fight’ a lot better), probably due to the increased damage. It feels a little more accurate too, even though it isn’t really supposed to be, according to the Store/Inventory info for the gun. So, I figured this is a great time to do some testing! [Yay, tests! lol]

      AEK-971 Accuracy Analysis

      I did some basic analysis on the recoil pattern of this rifle and it is indeed similar to the default assault rifle, but the AEK is ever-so-slightly more accurate, in my opinion. Here is an example of a test I did, a screenshot of the spread patterns, collecting the bullet markings, below:

      Coloured spray paint marking the AEK-971’s Bullet Spread, on average
      (Click to see Full Size)
      • The left side is the spread while ‘shooting from the hip’, not using the sights, just standing there holding down the trigger  [the spray painted arrow is red-coloured as in, ‘try not to do this at all if you can, unless in very close quarters combat’]
      • The right side is the spread while ‘zoomed in’, that is, using the sights on the gun (it would use a scope if there was one), still just standing there holding down the trigger  [the spray painted arrow is yellow-coloured as in, ‘try to avoid this’]
      • In the middle is the spread while zoomed in/using the sights, crouching down, still holding down the trigger though – but also now compensating for the recoil of the gun (attempting to contain the spread into a small area) – in this case, slowly pulling DOWN the mouse while firing since the recoil of this gun pulls the barrel UP  [the spray painted box is green-coloured as in, it is recommended to do this (even better if you can tap the trigger instead of holding it down)]

      As you can see, even though the rated accuracy for this gun is “Low”, you can get a pretty decent containment of the spread, by kneeling down, using the sights, and compensating for the recoil by moving the mouse accordingly [this little tip helps with all guns].

      In most games, you can try to compensate for the recoil of a gun by slowly moving the mouse in the opposing direction to where the barrel travels. For instance, if the recoil pulls the barrel of the gun left, when shooting, moving the mouse to the right then, will cancel out some of the recoil and make for a smaller spread of bullets and easier/faster repositioning for the next shot. Try to remember that each gun will be  different in it’s recoil and which direction you should compensate, when using each weapon though. 
      [Note that due to game programmers making bullets ‘miss’ (no matter what), in an attempt to imitate reality (which has imperfections in the gun and bullets, air changes, etc), it will never be possible to fully compensate/correct for the ‘spread’ of bullets in a gun (this goes for most games)]. 



      In my tests, the Assault Default G3A4 seemed to pull up and away to the left slightly, when shooting it. Holding down the trigger longer, the gun climbs way up into the sky easily (hence the “Low” Accuracy rating, I assume). For the AEK-971, it does still pull up, but it does not pull to the left in the same way as the G3A4, especially when using the sights. It sort of does a light ‘stepping’ to the left and then to the right, somewhat randomly [whatever the algorithm is in the programming]. This, to me, makes it ever-so-slightly more accurate in the ‘feel’ of the gun, because while it still ‘goes all over the place’ when shooting, it sort of compensates for itself just a bit, and the end result is more of a direct climb up in the recoil, something that felt, to me, easier to compensate for than with the Assault default G3. (I assume this very slight change in the spread/recoil is not enough to win this gun a “Medium” rating in Accuracy, but it is enough to make you have to Level to 3 in order to be able to purchase it..).

      Close-To-Medium Range Kill with the AEK-971 in Myanmar. Even with the ‘side-stepping’ that the gun does (and the enemy strafed around as he ran out towards me from behind the rock in the center of the screen) I still got the kill, mostly due to the Very High Damage Rating of the weapon
      (Click to see Full Size)

      In Conclusion

      Overall, the AEK-971 was similar to the default Assault class rifle, the G3A4, when playing. To me, it did feel slightly more accurate, but not by much. If you are having a really hard time hitting people with the G3A4, your accuracy won’t increase very much at all if you purchased this rifle. However, if you are getting used to the default Assault gun, this one packs a lot more punch, and you’ll be getting more kills overall if you upgrade to it. Because I recently won this gun Permanently [during the course of compiling this article, yes it does happen in The Daily Draw! woot] I can’t see the current price for this rifle anymore, to purchase it from the in-game Store; but last time checking, it was only 300 Credits to try it out for one full day. It was also listed as [what I call] ‘Earnable’ because, if you can rack up 45,000 Credits, you won’t have to pay for upgrading to this rifle with any Real Money at all (you can just use the Credits). If you did buy some Play4Free Funds and have 1,250 to spare, you can purchase it at anytime (not having to wait until Soldier Level 3), permanently. So in closing, PlayTesting the AEK-971, I found it slightly better than the Default Assault Class Rifle, even if it only ‘felt’ that way due to the higher damage it does.

      Long Range Kill with the AEK-971 in Myanmar. The thin iron sights of the gun (default sights) help a lot with targeting farther away. With the Very High Damage Rating – even though the gun has a Low Accuracy Rating – single-shot/tap shooting can still make it lethal at range, when needed
      (Click to see Full Size)

      Have fun trying it out for yourself sometime and See You In The Games!

      Gameplay Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

      INTERIOR DESIGN IN BANKE HOTEL

      BANKE HOTEL

      BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

      BANKE HOTEL DESIGNBANKE HOTEL DESIGN

      The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

      Choosing a Sensible Diet, Healthy Appetite

      So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

      Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

      So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

      Every time we open our mouths to eat we make an important decision concerning our future.

      Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

      Diet Start

      What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

      It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

      Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

      Don’t Be a Faddist

      On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

      In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

      It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

      Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

      Rules for Choosing a Sensible Diet

      Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

      The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

      What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

      From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

      The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

      Rörstrandsgatan Popular Extraordinary Penthouse

      Extraordinary penthouse in the popular Rörstrandsgatan.

      Extraordinary penthouse
      Extraordinary Penthouse
      This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
      Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
      Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
      LivingsRoom
      LivingsRoom

      BeDroom Design
      BeDroom Design

      Bathroom Desing
      Bathroom Desing

      Design Schema
      Design Schema

      Georgia Bloggers Meet-up

      I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

      This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

      So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

      The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

      We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

      I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

      Jayne, Kelly, Angie, Stacy, Tara, Valerie

      PhotobucketThe Teacher Wife

      Funky Fresh Firsties

      ...And They All Fall Down...

      Georgia Grown Kiddo's

      Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


       
       

      Michelin, Jessica, Greg, Erin, Alison

       

      The weight question continue…

      Take a health check .. .

      Before you begin a new dietary regime or exercise programme, check with your doctor that your health status allows you to do so. A health check is vital if:

      • You are suffering from any ongoing health problems
      • You take regular medication
      • You are under 20 or over 65, because children, teenagers and the elderly have specific nutritional needs.

      And a reality check …

      If you do have a problem with your weight, stop beating yourself up over it. Being fat is not a sin or a criminal offence. It is simply a consequence of careless eating and lifestyle.

      Diet Start

      Even if you have tried every diet going, this one does not have to be the same. You are going to change your lifestyle and give up a few bad dietary habits. So, unless you have a medical condition that prevents you from losing weight, this approach will help you become slimmer and, more importantly, fitter.

      Being overweight can undermine your self-esteem and the way you deal with situations. Losing weight won’t change the fact that you have money worries, an unsupportive partner or hate your job, but when the pounds start to fall away and you begin to feel better about yourself, you will deal with those issues very differently. Your confidence levels will rise and you will have lots more energy, which will help to make all of your problems seem more manageable.

      Don’t be negative even before you start. This is not the problem you think it is – it’s the solution.

      OBESITY AS A DISEASE – NOT A MORAL FAILING

      `Obesity is a heterogeneous disease in which genetic, environmental, psychological, and other factors are involved. It occurs when energy intake exceeds the amount of energy expended over time. Only in a small minority of cases is obesity caused by such illnesses as hypothyroidism or the result of taking medications, such as steroids, that can cause weight gain.’

      TAKING A HOLISTIC APPROACH

      • What you weigh is the result of several factors:
      • How much and what kinds of food you eat
      • Whether your lifestyle includes regular physical activity
      • Whether you use food to respond to stress and other situations
      • Your physiological and genetic make-up
      • Your age and health status.

      Successful weight management should address all of these factors. That’s the reason for ignoring products that promise quick and easy solutions, or permanent results without permanent changes in lifestyle. Any product that promises that you can lose weight without lowering your calorie intake and/or increasing your physical activity is trading on fantasy and false hope.

      Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

      Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

      In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

      Here is where the Skins, Mounts, Announcers, etc can be located now:

      The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

      Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




      That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


      Teachers’ voices matter, and I want to hear from you!

      Hi bloggy friends! I know it’s been forever since I’ve updated this blog, and trust me — lots of ideas are percolating in the hopper about my flipped(!) fourth grade classroom and other things I’ve tried this year. I promise those posts are coming! But in the meantime, I need your help!

      As some of you may know, I’m working on my PhD in addition to teaching fourth grade full-time. The work-life balance has not been an easy thing, and now, I’m really working hard to finish as much coursework as possible in the short term because baby #2 will be arriving in November! (So while you all are hanging out by the pool having tasty margaritas, I’m crunching numbers for a stats class and reading about how to write ethnographic fieldnotes. Good times, I tell you…)

      This summer, I’m starting to work on my dissertation, and I’m testing out my ideas in a pilot study. I’m planning to write my dissertation about the amazing elementary blogging community and the ways that teachers use blogs for professional development and personalized learning. I know that reading other teachers’ blogs has been hugely inspiring for me as a teacher, and I can’t imagine what I would do if I didn’t have access to so many great teaching minds across the globe. Shockingly, however, very little has been written about these great online communities and their benefits, and I want to explore that further. Scholars, politicians, and administrators need to know how much teachers learn from each other! Which is why I need your help.

      I’m looking for a few teachers who would be willing to be interviewed about how they use blogs to support their work in the classroom. I want to talk to both bloggers and readers, so even if you don’t have a blog of your own, I’d still like to talk to you. This first wave of interviews will take place next week (June 20-26) and they will all be done online via Skype or Google Hangouts. I anticipate that each interview will last 45-60 minutes.

      If you are willing to participate, could you please fill out this form so I can contact you directly? In exchange for your time, anyone who participates in an interview will receive up to $20 worth of free products from my TpT store.

      Loading…
      Once you fill out the form, I will be in touch to arrange a time that will work best for the interview. I need to conduct (and transcribe!) at least 3 interviews next week to fulfill the requirements of my current coursework, but don’t let that small number deter you — I will need many more interview participants once I move beyond my pilot study and begin work on my actual dissertation, so I’d love to have a list of possible interviewees already started. And my offer for the free products from my TpT store will still stand.

      I hope that you will consider participating! I look forward to talking to you and learning from you.

      Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

      In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

      • capture points
      • shields
      • generators
      • spawn rooms
      • terminals
      and more…
      In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
      During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

      Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
      [A separate tutorial for an Amp Station can be seen here:
      http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

      With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
      Enjoy and See You In the Game!

      The Ten Steps of Body Clock Diet

      The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

      1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
      2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
      3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
      4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
      5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
      6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
      7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
      8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
      9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
      10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

      Food Repair Guide: Baking Part 3

      Marzipan

      It pays to make your own marzipan as the real thing tastes so much better than bought. Since it is only a question of beating together ground almonds, sugar and egg white to moisten, there is nothing to go wrong.

      Biscuits

      Biscuits are simple to make and homemade biscuits always impress guests.

      They have four dangers: being too soft so that they spread into shapeless plops; being too short or having too great a proportion of fat which makes them hopelessly crumbly; being overhandled, like pastry, which makes them tough; and getting overcooked, which they will do at the drop of a hat.

      Diet Start

      Texture

      Since most biscuit mixtures contain butter, they will always become softer when they go in the oven, so, if your mixture is very runny when cold, it will run away altogether once it gets hot. Unless the mixture is being cooked in a restraining tin try to ensure a reasonably firm texture. Apart from anything else, if it is too runny the biscuit will tend to be tough.

      Crumbling

      If you want to use a very short mixture, mould the dough by hand rather than trying to roll it out, as you will not succeed. Cut the biscuits into fat rather than thin shapes so they have more chance of holding together.

      Toughness

      Do not handle the biscuits more than necessary to get the ingredients well mixed.

      Overcooking

      Once the biscuits have gone in the oven, watch them like a hawk. Take one out and cool it to test, as a biscuit, especially a dark coloured one such as chocolate or ginger, will often be cooked long before it looks cooked.

      Failures

      Biscuits that have fallen apart, spread or generally failed to live up to expectations, can always be broken up and used as decorations, or crumbled and used as biscuit bases (held together with butter or egg white) for dishes such as cheesecakes.

      1923 Buick Roadster with a cool spare tire lock and tool kit

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      DESIGN ROOM HOTEL LE ROYAL MONCEAU

      Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

      37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

      LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

      The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

      LUXURY GIRLS BEDROOM DESIGN DECOR

      LUXURY GIRLS BEDROOM DESIGN DECOR

      They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

      LUXURY GIRLS BEDROOM METAL DESIGN DECOR

      LUXURY GIRLS BEDROOM METAL DESIGN DECOR

      LUXURY GIRLS BEDROOM DESIGN IDEAS

      LUXURY GIRLS BEDROOM DESIGN IDEAS

      LUXURY GIRLS BEDROOM DESIGN CONCEPT

      LUXURY GIRLS BEDROOM DESIGN CONCEPT

      The trip to Hyderabad India

      I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

      I have applied for my visa nd waiting to collect it. will do it tomorrow.

      RELAXING BATHROOM MODERN DECORATION

      Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

      LUXURY RELAXING BATHROOM DESIGN

      LUXURY RELAXING BATHROOM DESIGN

      We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

      LUXURY RELAXING BATHROOM LUXURY DESIGN

      RELAXING BATHROOM LUXURY DESIGN

      LUXURY RELAXING BATHROOM DESIGN

      LUXURY RELAXING BATHROOM DESIGN

      LUXURY RELAXING BATHROOM GREEN DESIGN

      LUXURY RELAXING BATHROOM GREEN DESIGN

      LUXURY RELAXING BATHROOM STYLE

      LUXURY RELAXING BATHROOM STYLE

      Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

      I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

      Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

      Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
      (Reduced size, framerate and quality, to fit Upload requirements at Steam)
      Click to see slightly larger Full Size
      On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

      To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
      You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
      [Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

      If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

      While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

      For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

      The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

      Try it out on your next Character perhaps – and have fun in Fallout 4!

      Innovative Office Furniture Sets Were Designed by Vitra

      These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

      Innovative Office Furniture SetsInnovative Office Furniture Sets

      Innovative Office Furniture SetsInnovative Office Furniture Sets

      Innovative Office Furniture SetsInnovative Office Furniture Sets

      Innovative Office Furniture SetsInnovative Office Furniture Sets

      This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

      Popcorn Cart, Warren, Ohio, circa early 1910s

      https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

      INTERIOR DESIGNERS NEW YORK CITY

      INTERIOR DESIGNERS NEW YORK CITY

      INTERIOR DESIGNERS NEW YORK CITY

      Are you planning an interior designers in New York City? Looking for the lights of New York City? A field of interior design flourishes at New York Medical Interior Design. This is a niche area of ​​design. The focus is that of furnishing medical care institutions must be given to patients not only the service friendly, but friendly design as well. The reason is that hospitals will not only try to repair the physical ailments of patients, but the psychological and spiritual well-being of the patient as well. The population is aging and the need for sensitivity to the design, construction and installation is becoming an important part of the management of age. responsive design provides some relief therapy and improved quality of life for retirees.

      Interior design students and professionals are increasingly aware of the medical concept of interiors in New York and other large cities. “Health professionals and designers believe that the concept of environment helps patients physical, mental and emotional wellbeing. What exactly does New York medical interior design involves what are the therapeutic and economic benefits? If medical services who wish to provide a therapeutic context, then what should be the development architecture? INTERIOR DESIGNERS NEW YORK CITY are important points interior designer must consider when creating a design for a medical center. If the installation activity promotion and creativity, so that should be incorporated into the design.

      The space must be organized so that patients have the privacy of your health care environment. Planting, lighting and colors have been used effectively to create a pleasant environment must not disrupt or interfere with the routine of the patient. Factors such as codes, regulations, and the money available for the design of medical affairs in New York interior designer, is responsible for knowing and following. There are several quality books on the interior of the doctor. If a medical institution on patients’ and Senior Care then they should definitely consult an interior designer experience in this field. If the search for textbooks in the field not to look over the books written by Jain Malkin. His research on the subject has led to a series of excellent books. Interior designers new york city research has resulted in more and better places for patients and those who work to change the appearance of buildings and health facilities.

      BEDROOM DESIGNERS NEW YORK CITY

      BEDROOM DESIGNERS NEW YORK CITY

      KITCHEN INTERIOR DESIGNERS NEW YORK CITY

      KITCHEN INTERIOR DESIGNERS NEW YORK CITY

      CONCEPT KIDS ROOM PAINT COLORS DESIGN

      KIDS BATHROOM PAINT COLORS

      Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

      This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

      First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

      Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

      KIDS ROOM PAINT COLORS
      KIDS BEDROOM PAINT COLORS

      And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

      Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

      Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
      (Click to see Full Size)

      Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

      The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

      I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

      [Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

      The Vital Acid—Alkaline Balance continue…

      Excess salt intake can also severely upset the body’s water balance. Along with potassium, which also occurs naturally in fresh foods, the sodium in foods and in salt itself (which is sodium chloride) plays an important part in the movement of electrons through the body’s water- based protoplasm. This is why sodium and potassium are known as electrolytes. Potassium tends to concentrate in the cells, sodium in the fluids outside the cells. The balance between sodium and potassium, when it is right, sets up a dynamic tension that makes it possible for the living cells to react quickly and efficiently to nerve stimuli, to exchange nutrients and wastes easily through the cell wall, and to maintain the proper interior and extracellular water balance. Too much sodium, which most of us get from eating salt, upsets this balance altogether and can cause troubles. It forces the body to hold on to extra amounts of water to make up for the extra salt one has eaten. Tissues become bloated, and this salt-caused edema can interfere with the blood’s oxygen transfer to cells as well as creating extra pressure against the blood vessel walls themselves. These are some of the reasons the Lifestyle Diet eliminates salt both in cooking and at the table. It relies instead on fresh and dried herbs, garlic, and spices for seasoning.

      Diet Start

      Throw out the Coffee

      Caffeine, a trimethylated xanthine, is found in coffee beans, tea leaves, cola nuts, and cacao, from which chocolate is made. Together with nicotine and alcohol, it makes up a trio of the most widely used psychoactive drugs in the world. The xanthines are stimulants to the central nervous system. They increase heartbeat rate, increase the volume and concentration of acid in the stomach, relax the smooth muscles in the body, raise blood lipids, stimulate the cerebral cortex (which means they heighten the intensity of mental processes), banishing drowsiness and feelings of fatigue. Caffeine and alcohol also have a diuretic effect on the system, causing frequent urination.

      The average cup of coffee contains between 100 and 150 milligrams of caffeine per cup, instant coffee somewhat less, tea between 60 and 75 milligrams, cola drinks between 50 and 60 milligrams. This means that if you are drinking four or five cups of coffee each day you are getting a dose of 700 to 750 milligrams of caffeine. To any pharmacologist a dose over 250 milligrams is considered large, although about a third of people in the West get twice as much each day and one person in ten actually imbibes more than 1,000 milligrams of the drug caffeine every twenty- four hours. The full long-term implications of drinking coffee (and, to a lesser degree, tea and cola drinks) are still not clear. However, enough is known already to inspire any woman concerned about the preservation of her health and beauty to give them up completely. For caffeine is a stimulus you do not need on a healthful low protein, low-fat diet high in unrefined carbohydrates.

      The link between caffeine intake and anxiety symptoms has been well established. Dr. John Greded, associate professor of psychiatry at theUniversity of Michigan, and his colleagues and others have reported that high caffeine consumers have statistically significant elevations in anxiety scores. The risk of developing peptic ulcers is also 1.4 times greater among coffee drinkers than among non-coffee drinkers. There is now evidence that coffee consumption by pregnant women can be dangerous to the unborn child Caffeine has been shown to cross the placental barrier where its mutagenic and perhaps even teratogenic potential may cause genetic changes and, therefore, birth defects.

      Finally, a daily intake of caffeine from coffee drinking is the same as continuing to supply your system with any other drug to which it has to adjust and which ultimately it has to detoxify and eliminate. One of the main principles of any long-term diet for health and beauty is, never add to the body anything which is not necessary and with which it has to deal. The fewer toxic substances there are, the less contribution they will make to tissue sludge, premature aging of skin, and the subclinical vitamin and mineral deficiencies which result in falling hair, breaking fingernails, chronic fatigue, and mental disorders. In the Lifestyle Diet, coffee, tea, cola drinks (even those without sugar), and cocoa are out. Instead, you can drink mineral waters, herb teas (but always in moderation since some of them in excess may not be good for you either), fresh fruit and vegetable juices, and coffee substitutes made from roots and grains.

      And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

      I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

      Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

      My version of The Blog logo, done in the style of the GTAV game title logo
      (Click to see Full Size)

      The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

      The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

      A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

      I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

      I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

      Original GTAV game logo design by Rockstar, Take-Two Interactive

      [Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

      How To Use The Mouse To The Best Of Your Ability (a.k.a. How To Be A Better ‘First Person Shooter’) [Text-Only]


      [Text-Only – This Post is Text-Only Mode, for now. I may return to this posting and add Screenshots or Images at a later time.]

      I was browsing around in the Steam Forums [forii?], where I like to try and answer Technical Questions and give Suggestions about Gameplay and Tips – and I recently answered a query someone had about using the Mouse in Fallout 4 (arguably a ‘Shooter’ game for the most part) and how it seemed difficult for them to aim in the game (it is possible to utilize an Automated Aiming capability called V.A.T.S., in Fallout 4 – but the game can also be played ‘in real time’ without it, playing as a First Person Shooter would be played, similar to games like Overwatch, Counter Strike: Global Offensive, Battlefield, and more).

      So, I answered with a somewhat-lengthy reply, trying to be helpful and informative, letting them know where to do things like change the Settings of the Mouse and the Sensitivity; really trying to show them that there needs to be a ‘personalization’ of the Mouse Settings, if they wanted to utilize the Mouse, as a gaming tool, to the best of their ability (to “let your ability shine through the Mouse” as it were).

      I thought it might be nice to share my answer here too, then – to share with others that may be wondering things like:

      “Why am I having so much trouble aiming/killing in <game name>?”

      “Why does it seem so hard to kill people <in a Multiplayer game>?”

      “How can I improve my gameplay in Multiplayer/Player-Versus-Player?”

      …and similar questions.

      Thus, here was my reply in the Forum… Perhaps it can be of some use to you:

      —–

      If I may pop in, as a ‘First Person Shooter’ since Wolfenstein 3D (1992), and having won some Local Tournaments in the past (UT99 and Quake III Arena); you really need to find your own personal ‘mouse sensitivity’…

      (I used to do 180’s while running to ‘check my six’ or headshot the player behind me – which they didn’t like of course, heh)

      Note that this must be adjusted for every new mouse and potentially every new game. This is the only way to truly have a movement and reaction time/rate in the game that you personally feel comfortable with.


      There are a few places you must adjust it:

      – in Windows (Settings>Devices>Mouse [for Windows 10])
      – in Mouse Software (that disc that comes with the Mouse that everyone ignores, or the manufacturer’s Drivers and associated ‘Software Configurator’ of some type for the mouse from their website), where you can also Keybind different keys or combinations to your Mouse, if it can do so, and set DPI gradations/steps.
      – in the Game (Options or Settings)


      Again, I cannot helpfully stress this enough; try to do this for each and every game you play – it is amazing in how it can personalize your comfortable movement/scan/hit rate.
      It is really possible to ‘hit anything’ in a game, if you make your own personalized changes to all of the above.


      Some people like to move their mouse a lot, slowing down the movement into smaller gradations for sniping and tight movements.
      Some people like to move their mouse very little, using mostly their fingers and hardly turning their wrist (these types usually switch DPI settings as-they-move, for sniping and tighter movements).

      Both are arguable for usage and both can utilize the DPI settings/changes possible on modern mice.
      You must find your own movement type and movement rate, set by those three locations previously stated.

      Once you set the mouse how you like it – whether you switch DPI settings on-the-fly (to make your character scan slower or faster, switching between scoped and non-scoped, for example) or whether you keep one DPI setting and alter how fast you move the mouse – you will find that you can aim/scan/hit a lot better (and also not get tired as fast).

      Tip: Don’t forget to turn off any Mouse Acceleration (The kind that moves your mouse pointer farther on the screen if you move the same amount of space on your desk, only faster)… This only adds to the difficulty in scanning/aiming and makes it harder to build up muscle memory for your mouse (such as, “I move my mouse this far, and my view onscreen moves this far”).

      The only recourse, other than doing the above and taking all of the above steps, is V.A.T.S….(at least, to be totally comfortable and ‘reach your full potential’ with the Mouse (wow this is starting to sound like an Infomercial, sorry about that haha))

      But, try to have fun exploring it – find “You” in your mouse movements – and have fun learning how “You” play!

      —–
      Note, Dear Reader, that I am not trying to ‘be pompous’ or ‘brag’ here, with this posting… I merely stated my ‘qualifications’ at the beginning, to show that I learned a lot over time and that I had personally found some effective ways to improve playing, with the Mouse (especially in the past). 
      I do not wish to sound like to ‘know everything’ as well – and indeed can learn more – I just wanted to share what I did learn over time and hope that this might help others out, too. If you are an experienced FPS player (‘First Person Shooter gamer’), then you no doubt already know most of these concepts (or have figured them out on your own). 
      I should state that I am also nowhere near as good as I once was [being 40 now, alas, age occurs to all..]. Where I once could out-shoot almost anyone, regularly doing 180s-to-instant-headshots (as stated previously), I now regularly get my butt handed to me in games like Overwatch, CS:GO and the Battlefield series of games [although I can still get Top Spot on The Board at times! heh]. 
      Still, I wanted to try to help others… and I hope that this posting helps anyone improve their mousing (and killing/winning), if that is what they desire to do. 
      I always like helping others and teaching others what I can… “The wiser mind mourns less for what age takes away than what it leaves behind.” ~ William Wordsworth (1770-1850)

      SYITG

      DESIGN ROOM FOR SCIENTIST/GENIUS TEENAGER’S

      For today, we have compiled a series of five images that represent the Teenager’s Room Scientist/Genius. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular brown, and white. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for Scientist/Genius teenagers.

      Teenager’s Room Scientist/Genius Themed

      Teenager’s Room Scientist/Genius Themed

      Last but not least, we believe that the Albert Einstein Pictures is a required element in the bedroom of a Scientist/Genius teenager’s, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

      Teenager’s Room Scientist/Genius Themed

      Teenager’s Room Scientist/Genius Themed

      Workout Anytime on WBIR-Knoxville Afternoon Show

      WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

      Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

      Update: Added images for Main Concepts sections (Food, Defense, etc)
      Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
      Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
      Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

      [Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




      I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

      Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
      (High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
      The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
      Click to see Full Size

      [Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

      Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
      Click to see Full Size 

      Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

      1.  In the very beginning, build Food and Water and Beds, as much as you can.  

      These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

       [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

      Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

      [The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


      2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

      Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

      You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

      A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



      Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




      3. Tied for the third most important thing/things to start thinking about, are these two concepts:

        • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

        Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

        If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

        [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

        • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

        Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

        [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

        ‘How do you Assign Settlers to Scavenging Stations?’
        Further down, there are Steps with Screenshots for each,
        in the Section “How To Assign Settlers To Work Stations”


        After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

         [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

        Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



        4.  As you find more Settlements, start up Supply Lines between them all…

        Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

        Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

        That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
        Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

        *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

        Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

        [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

        Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


        Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



        What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

        [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

        Remember: 
        Junk Items = Scrap Components = 
        Building Materials!


        Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
        • Repeated, Scavenging Station concept from above, as a Reminder:

          Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

        Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

         [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

        [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

        How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

        Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

        1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

        2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

        Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

        3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

        4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

        5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

        Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

        Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

        Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
        (Click to see Full Size)


        Starting out with Weapons (Similar Concept to Armor, Below)

        In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

        Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

        Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
        (Click to see Full Size)




        Starting out with Armor (Similar Concept to Weapons, Above)

        In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

        Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

        Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


        Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

        Did someone say CHEATS?

        Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


        Then wonder/wander no more – there is a way to instantly get all the materials you want!

        In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

        One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
        For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

        [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

        [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

        Want nearly-infinite food?
        Want nearly-infinite materials to build with?
        Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

        Then wonder/wander no more – here is a way to instantly get all the building materials you want!


        [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

        I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
        With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

        To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
        [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


        To quickly find the Fallout 4 game files location [in Steam, on PC]:

        Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

        In the Properties window that comes up, click on the ‘Local Files’ tab.

        It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

        This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

        In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

        Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
        (Click to see Full Size)
        Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

        1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

         bat allbasefood

         in the Command Console and hit Enter. That’s it!  

        1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

        1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

        2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

        bat allbasematerials

         in the Command Console and hit Enter. That’s it! 

        2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

        2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

        For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

        3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

         bat allyourbase9k

        in the Command Console and hit Enter. That’s it! 

        3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

        3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

        Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

        allbasefood.txt file
        allbasematerials.txt file
        allyourbase9k.txt file

        If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

        Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

        If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

        Is There A Way To Build More, Past The Limit?

        Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

        When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

        (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

        • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
        • Bring up the Pip-Boy and Drop the Guns on the ground
        • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
        • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
        • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

        That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

        Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



        [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

        My Trip to Baticaloa

        On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

        Limitations of Organization Capacity Assessment (OCA) tools

        Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

        The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

        As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

        The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

        The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

        The markers that I identified were:

        1. The organization starts adding parallel value chains to the existing organization structure.

        2. Organization does not move forward or backwards in the value chain

        3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

        4. History of young star performers leaving the organization on a continuing basis

        5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

        6. Long serving staff in a particular discipline / technology / expertise

        7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

        8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

        9. Large number of managers based on technical areas as opposed to value addition

        10. Staff do not take up higher education or professional development

        11. Average age of staff moves parallel to the age of the organization

        The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

        The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

        They were:

        1. Long serving staff in a particular discipline / technology / expertise
        2. History of young star performers leave the organization on a continuing basis
        3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
        4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
        5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
        6. Large number of managers based on technical areas as opposed to value addition
        7. Average age of staff moves parallel to the age of the organization

        In addition they displayed the following:

        1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
        2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

        The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

        The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

        Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


        Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
        Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

        A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

        “We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

        The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

        On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

        • Go to Raptr.com
        • Sign in to your Raptr account
        • Click to get your gameplay data

        If you have any other questions, please send us feedback.

        We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

        Dennis “Thresh” Fong
        Co-founder and CEO”


        Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

        The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
        (Click to see Full Size)

        At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

        The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
        (from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

        Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

        The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
        (Click to see Full Size)

        There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

        Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
        (Click to see Full Size)

        As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

        The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
        (Click to see Full Size)

        While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

        Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
        (Click to see Full Size)

        Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

        Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
        (Click to see Full Size)

        Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

        reACT Trainer Total Body Circuit Workout

        One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

        Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

        Horizontal Press (chest press of some type)

        Horizontal Pull (Row of some type)

        Overhead Press

        Vertical Pull – (some type of vertical pulling movement)

        Here is a sample reACT Trainer Total Body Circuit:

        Men’s Body Click Diet part 1

        In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

        Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

        Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

        Diet Start

        The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

        The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

        Prostate Ailments: The ‘Male Problem

        There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

        The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

        What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

        Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

        Diet and Prostate Health

        If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

        But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

        Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

        Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

        I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

        The “Fatal Graphics Error” message, when starting MTW2

        I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

        Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

        Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
        is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
        Click image to see Full Size

        After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
        Hopefully that works for you all, as it did for me.

        See You In The Games!

        ROOM DESIGNS FOR TEENAGE GIRL

        ROOM DESIGNS FOR TEENAGE GIRL

        For today, we have compiled a series of five images that represent the rooms of girls. We try to choose different: we went with serious internal and sober, but also gave him a shot at the famous and very popular pink, orange and red scheme. All rooms are practical, with work spaces, small libraries and shelving systems for books and CDs and fine cabinets specially designed for teenagers. Last but not least, we believe that the mirror is a required element in the bedroom of a girl, although some of the pictures below, you will realize that they have a special status. Even if all design ideas have a particular theme rooms, the furniture is very close to each other to create interiors that are functional and aesthetic. Take a look!

        ROOM DESIGNS FOR TEENAGE GIRL
        ROOM DESIGNS FOR TEENAGE GIRL
        ROOM DESIGNS FOR TEENAGE GIRL
        ROOM DESIGNS FOR TEENAGE GIRL

        The Amazing Power of Focus

        I frequently like to put on music while I work, and I sometimes do that in my classroom, too. I’ve rotated through many Pandora playlists, and I use Spotify a fair amount. I like the music on those sites, but they’re more for entertainment than work.

        I’ve finally found a resource that really seems to help me and my students get into the zone and focus.

        Let me introduce you to my favorite new website, [email protected]

        This website allows you to listen to instrumental music from a variety of genres that has been specially selected to get you into a state of “flow.” The music is sequenced in an order that draws on neuroscience and research about the impacts of music on productivity. They have a huge section documenting the science behind the playlists. 
        I tried this site while reading some really dense texts for a PhD class, and I really felt like it helped me stay focused and productive. I cruised through the articles in record time! I also had it playing while I worked on writing this morning, and I do feel like it’s impacting my personal productivity. It seems to be helping my students as well. 
        They have two membership levels — a free version and a paid version. The free version gives you 60 minutes of each playlist before stopping. You can listen to the playlists multiple times, but it will always be the same playlists. The paid version allows you to set a timer, customize playlists, listen to unlimited music, and track productivity for $4.99 billed monthly or $45 billed annually. I’m currently using the free version, but I suspect it won’t be long before I upgrade. It’s having a big impact on my productivity. 
        If you like to have music on in the background while you or your students work, I’d definitely recommend giving [email protected] a try. I’d love to hear about your experiences with it in the comments!

        I like www.focusatwill.com so much that I’ve become an affiliate with the site. This means that if you click the links above and subscribe, I’ll receive a very small commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

        Spotted in a hoarders driverway

        the front yard was covered in a variety of junk.

        Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

        Health Benefits of Guava for Health and Beauty

        Health Benefits of Guava for Health and Beauty

        Health Benefits of Guava for Health and BeautyGuava has a Latin name Psidium guajava is also often described as guava and guava. The origin of the fruit is reportedly from a country where the sport of football was born, namely Brazil, and managed to get in Indonesia through trade channels in Thailand.
        Guava and Guava has a sweet taste, and not infrequently there is still sour. Round shape leaves with green skin and flesh have two color variants of white and red are where there is little seed seeds can also be consumed.
        Health Benefits of Guava for Health and Beauty - 1
        The Nutritional Content of Guava
        There are dozens of nutrients stored in guavas and in each of these nutrients plays an important role in terms of health shore up the human body and diligent person to consume.
        Here are some nutrients that are embedded in Guava :
        • The Water Content Is Not Small
        • Contains Fiber
        • Calories
        • Containing Protein
        • Fats
        • Contain Carbohydrates
        • Contain Iron
        • Abu
        • Containing Calcium
        • Containing Phosphorus
        • Contains Vitamin A (Carotene)
        • Contains Vitamin C (Ascorbic Acis)
        • Contains Thiamin (Vitamin B1)
        • Contains Vitamin B2 (Riboflavin)
        • Contains Niacin (Vitamin B3)
        With the presence of a number of nutrients above the guava fruit can be said as the fruit is also rich in nutrients. Because of them that many people who want to cultivate the fruit is sweet, while it was for her own use is not only edible but also processed into drugs.
        Benefits of Guava
        Many diseases are able to be deflected slowly by this fruit, some of which are as follows.
        1. Can Fight Cancer
        Get used to a healthy lifestyle on a daily basis in order to avoid serious diseases such as cancer that have reported more patients to death. You can prevent cancer in a way that is diligent guava consumption. There is an antioxidant that is able to do this. Lycopene in guava is known it is easier to be absorbed in the body than the tomatoes because the difference in cell structure.
        2. as Diarrhea Drug
        Diarrhea should be quick to take medication. The medicine is not to be made in the factory, you can use a method that is more secure and healthy as a drink with guava juice three times a day. Guava plant also has antibacterial properties, these properties that you can use to stop diarrhea and dysentery. The antibacterial properties either be created because of the content of karetinoid, vitamin C and potassium in it.
        3. Can Lower Blood Pressure
        For People with hypertension are often recommended by doctors to familiarize the consumption of foods and beverages derived from guava and mangosteen peel. Why? because the fruit contains potassium, which is said by the results of the study were able to treat hypertension and lowers LDL cholesterol excess.
        4. Cough and Flu
        Highly vulnerable to extreme weather conditions to make your baby have a cold with a cough. The mother must take action, by giving red guava juice that also contained vitamin C and iron which can inhibit the influenza virus infection.
        Health Benefits of Guava for Health and Beauty - 2
        5. Can Overcome Constipation
        Constipation or constipation is the most frequently encountered problems. If you suffer from the same thing you do not immediately take medicine, try to eat a medium-sized guava fruit which also included a 36 percent fiber needs that doctors recommend.
        6. Make More Stomach Satiety
        Guava is the food you choose as a booster stomach, because the content of fiber, protein and some vitamins in it is suitable to withstand hunger. If you are running the program for the diet, the fruit seems appropriate to provide chances of success of your endeavors.
        7. as Drug Thrush
        Thrush occurs because a deficiency of vitamin C as well as drinking water. You can meet the daily requirement of vitamin C by eating guava, besides that because the vitamin content can be overcome thrush was moved at this fruit.
        8. Diabetes Mellitus
        Drink a concoction of guava which has been boiled and filtered water is believed to be able to treat the disease diabetes mellitus.
        9. Younger
        Antioxidants are cooperating also with vitamin A, C and potassium in guava able to treat your skin to keep it tight so avoid premature aging.

        It is remarkable not properties of guava fruit that previously may not know fully. From now make guava as a table fruit that is ready to wash the mouth after every meal. Hopefully article Health Benefits of Guava for Health and Beauty we share today can be beneficial for you. Thank You.

        What Kind of Protein is Best?

        There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

        Diet Start

        The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

        If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

        WORKOUT ANYTIME on Entrepreneur.com

        Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

        My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

        An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

        Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
        And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

        I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

        • Fontstruct (where I created the font by hand): 
        • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

        • Fontspace: 
        • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

        Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
        [email protected]

        Usage License: (Creative Commons, Attribution License, 4.0)
        You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
        If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

        As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

        Edit:
         I may return and add some images and examples of the font… Soon™
        Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

        ‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

        As the First Post of a new type of article here at The Game Tips And More Blog
        [started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
        What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

        • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
        • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
        And so, here is the first edition of a new addition to this blog, without further adieu:

         

        This Month’s Featured Setting

        Bandicam’s Xvid Codec

        For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

        If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

        The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

        Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

        The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
        Click to see Full Size

        Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
        table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

        Recorded Game Title                     Resolution      Performance Hit (Δ)
        Hitman: Absolution Benchmark 1366×768 ~ 2 fps
        Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
        FurMark (Full Run) 1366×768 ~ 2 fps
        FurMark (Full Run) 2560×1440 ~ 0 fps
        Unigine Valley Benchmark 1366×768 ~ 6 fps
        Unigine Valley Benchmark 2560×1440
        Batman: Arkham City Benchmark 1366×768 ~ 4 fps
        Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
        Skyrim (Introduction) 1366×768 ~ 0-8 fps
        Skyrim (Introduction) 2560×1440
        Minecraft 1366×768 ~ 0 fps
        Minecraft 2560×1440 ~ 0 fps

        table code created by Danny Sanchez (journalistopia.com)

        As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

        Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

        [In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

        Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
        Click to see Full Size
        The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

        Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
        Click to see Full Size
        The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

        [I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

        Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
        Click to see Full Size
        The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

        Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
        Click to see Full Size
        The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

        These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
        Click to see Full Size
        While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

        Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

        The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

        Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

        When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

        One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
        What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
        The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
        Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
        table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
        Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
        Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
        Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
        FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
        FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
        Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
        Unigine Valley Benchmark 2560×1440
        Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
        Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
        table code created by Danny Sanchez (journalistopia.com)
        Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
        The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
        Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
        As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
        The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
        Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
        Click to see Full Size

        Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
        Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



        See you in the games!


        Personal Short Version/Opinion:


        While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

        I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

        As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

        Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
        Last Remarks (in addition/continuation to the Prologue of this article): 
        Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
        As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
        This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
        In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
        Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
         [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

         **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

        Health Benefits of Raw Sapodilla Fruit

        HEALTH BENEFITS OF RAW SAPODILLA FRUIT

        Health Benefits of Raw Sapodilla Fruit – Sapodilla fruit ripe has frequently we eat and has a sweet and tasty on the tongue, but have you ever you feel the sapodilla fruit still raw and half cooked. Raw sapodilla fruit flavors have mingled bitter sweet and would make for the consume gummy mouth.
        But so, sapodilla fruit raw to have efficacy as well as the benefits for the health of the body, because the content of vitamins and anti-oxidants in raw amber is very much beneficial for the body to be away from the body of free radicals that often affects the skin of the body.
        For those of you who do not want to consume Raw sapodilla fruit, here we will provide information on the benefits Raw sapodilla fruit for health, hope to be an inspiration and encouragement for you to consume the sapodilla fruit.
        Health Benefits of Raw Sapodilla Fruit - 1
        Benefits of Raw Fruits for Health
        1. Can Overcome Diarrhea Naturally
        Benefits of sapodilla fruit raw to health is a drug, diarrhea or loose stools are very powerful. High fiber content in the raw sapodilla fruit is very good in addressing the problem of diarrhea.
        How to apply the sapodilla fruit for diarrhea medicine there are two kinds :
        Method 1: Take a Raw sapodilla fruit is still fresh and peeled skin, and scar the flesh as well as brewed with warm water to one cup, let stand for 10 minutes and drink the water until they run out, do this way for 2 times a day.
        Method 2: Take the sapodilla fruit, half-cooked or Raw, and remove the skin, remove seeds also give a little warm water and also give 2 tablespoons of honey. Drinking Raw sapodilla juice twice a day.
        Health Benefits of Raw Sapodilla Fruit - 2
        2. Can Treat Dysentery
        Benefits of sapodilla fruit raw to the next health is to treat dysentery. Dysentery can be cured by eating raw sapodilla fruit. Take some sapodilla fruit peeled raw and coolies, chew the flesh as he added a little salt on the fruit, eat little by little until the end of sapodilla fruit. Apply 2 times a day until you disappear dysentery and cured.
        3. Can Treating Inflammation of the Mouth
        Benefits of sapodilla fruit raw to health can also be a natural cure inflammation of the mouth. The trick is to take the sapodilla fruit and splitting it into several parts (after peeling).and sapodilla fruit that has been cut is boiled with 1 cup of water until the water changes color. Wear this sapodilla fruit boiled water to rinse. Do it until the water runs out, do it twice a day until the inflammation of the mouth healed.
        Thus some of the benefits of raw sapodilla fruit for a healthy body. Hopefully with this short article can add to our knowledge of traditional medicine wear natural fabrics such as sapodilla fruit. Hopefully this article Health Benefits of Raw Sapodilla Fruit that we share today can be beneficial for you. Thank You.

        Back to School – Math Edition

        It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

        I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

        To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

        The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

        As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
        Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
        • You may use any combination of addition, subtraction, multiplication, and/or division
        • You may combine numbers, e.g., use 2 of the fours to make the number 44
        • You may insert decimal points
        • You may use a four as an exponent
        • You may use square roots
        • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
        • You may use overbars to make a decimal repeat
        • You may NOT use any digit other than a four
        • You MUST use all four 4’s in each solution

        Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

        We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
        Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
        Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

        Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

        Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

        Quick Tip: Getting ACTION, Dxtory, FRAPS and More Working With Battlefield:Hardline [Fix/Workaround]

        I have been doing some Recording Tests over the past while with Mirillis’ ACTION – for those who aren’t familiar with it, ACTION is a game recording application, similar to MSI’s Afterburner, Bandicam, Playclaw and others – and I was reminded that it does not automatically “work” with Battlefield: Hardline [that is, ‘hook onto it’ or ‘detect-it-and-get-ready-to-record’]. I actually remember running into this issue during the Beta, but at the time I merely used another recording program and didn’t think much of it since. To find out more about this issue recently (since reminded of it) I dug around a bit and did a few tests, trying to find a solution and/or conditions it did work under – and wanted to share my few findings as a ‘Quick Tip’ for others, here.

        Looking around, I found out that this is still an ongoing issue with Battlefield: Hardline – and before that, it was to some extent with Battlefield 4, even causing BF4 to ‘crash’ on Startup for some people. I also found out that these issues occurred not only with ACTION, but also with other similar programs, such as FRAPS and Dxtory, according to the Battlelog Forums and the main Mirillis Forum. In many places, I found the same solution stated again and again by helpful posters… So, I tried it out – and it worked perfectly! I repeated testing with it a few times – and once I was satisfied it solved the issue and was repeatable (for others to use), I wanted to share it here, with you.

        Here are the steps of what to do [with a shortcut I figured out, to type it in faster/easier, near the end of this post]:

        • In the game, hit the Tilde key (“~”, which looks like a ‘squiggly’ line – the key is in the upper-left of Standard keyboards, to the left of the Number 1 and above the Tab key), which should bring down the Console. In here, you can type in commands for the game.
        • Type the following in one line:

          RenderDevice.PresentAsync 0

          (That is, “render device dot present async”, then a space, then a “zero”)

        • Hit enter and then you can close the Console by hitting the Tilde key (~) again.

        That’s it!

        As long as that is all you want to do in the Console (you don’t want to enter in any more commands), you can then just close it, as it is done – those are all the steps to do. You should then see the HUD (indicator) for ACTION pop up on the screen in the corner you chose in the “HUD Settings” section, in ACTION.

        Note that this may not always be needed… For example, if you launched BF4 in Windowed or Borderless modes, it may not be required. In Battlefield: Hardline, it seems to be needed no matter what mode you run the game in [for the interface of these programs to be shown and able to record without issues]. For example, I just started up Hardline in Windowed mode a couple of times as a test – with ACTION and FRAPS – and those steps were still needed to get these ready to record (their little hud/ui/interface did not show up at all until the above command was entered. 

        Another way I saw suggested in Forums, was to enter in the command via a User Configuration file (User.CFG), created in the game directory. For those who don’t know, a User Configuration file is simply a text file that the game will ‘run’ when it starts up – and this text file can have commands listed in it, so that you don’t need to manually type the command each time you play the game.

        Although even a Battlelog Moderator suggested it at one time, here, it seems it is possible that this process can be “detected” or “seen as” a hack – and you can effectively be Banned, Blacklisted from Ranked Servers, and other negative actions taken against you – as seen in this thread at the Mirillis’ Forums, here… Although I am sure there are many people out there using this command in a Configuration/Startup File without issue, as it has happened to some people in the past…I personally would suggest against going this route, for now, and merely type it in whenever you want to use ACTION/Dxtory/FRAPS/etc to record your gameplay in Battlefield games.

        On my own, I figured out a faster way of typing this command into the Console and wanted to share it here – apparently the Tab key will try to ‘guess’ at the terms you are typing in (much like the Command Line or Terminal in Unix, Windows, and other operating systems [black box screens that you open to enter commands]) and by using the Tab key, you can quickly enter the command above by using these steps, after opening the in-game Console with Tilde (~):
        Hit “r” then the Tab key
        Hit “d” then the Tab key again
        Hit “p” then the Tab key one more time
        Hit “0” (zero) and hit Enter
        That’s it! 
        R-tab-D-tab-P-tab-Zero. Done! Now, the same command as above has been entered even faster and you should see the HUD/indicator for your preferred recording program pop-up on the screen – and you can now record your battles once again. Here is an example/reminder GIF of using the Tab input method for this command, in Hardline:

        GIF Example/Tutorial/Reminder of How To Get ACTION, Dxtory, FRAPS And More to Work With Battlefield:Hardline
        (Click to see Full Size – Save and Share with others!)

        Hopefully the above gets these programs working with Hardline for you too, dear reader, as easily as it did for me.

        See You In The Game!

        [Personal Log TwoZeroOneSixPointSix: I could not find the ‘original’ bearer of this wonderful information, to give Credit to them – and to find out “why” it solves the issue with these few recording programs (as I am not a programmer, the reason is not immediately obvious to me) and I always like to try and share the “why things work” of solutions I present, to others as well. I eventually assumed it was a developer at some point in time, but in the vast posts of passed-on knowledge, their name has become lost into the aether… Regardless, I want to say ‘thank you’ to whomever this helpful dev is – and I want to pass on that thanks to all the other anonymous sharers of this tip [about this issue with Hardline] on Forii everywhere. This QuickTip is merely a culmination of, or passing on yet again of, this great bit of information on this issue with these few game recording programs and Hardline. Enjoy]

        The Best Text for Teaching How to Write and Revise Leads

        My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

        I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

        And every time I see this, I become more determined to break them of this thinking.

        Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

        My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

        This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

        If your teacher has to die, August isn’t a bad time of year for it. 

        Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

        Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

        I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

        One or two hands went up.

        Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

        And here I’m asking my students to take a second pass at their writing.

        I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

        Here’s what my students noticed, compiled into an anchor chart:

        Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

        We’ll get this revising thing down eventually…

        What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

        Knoxville News Sentinel featuring Kurt and April Nitzsche

        Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
        The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
        April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
        You can view the online article here. 

        My Trip to New Delhi & Hyderabad

        I am in New Delhi doing an assignment which requires me to do an organization capacity assessment of 5 research institutions in India to ascertain their capacity to receive research grants.

        The journey was interesting as the flight I took had a group of tourists (religious pilgrimage to Buddhist sites in India) of whom a majority were first time flyers. So it was fascinating to see the excitement in their faces as the flight progressed; from the smallest kid to the old folk (Gray haired men and women who were in their late sixties) started to peer through the windows to steal a glimpse of the geographic features below. I instantly recalled my first flight (which I took to the UK) when I was just a teenager.

        I had dreams of sleeping in the flight; however the rest of the passengers were too excited to be quiet. They were talking in loud voices and moving about so much that sleeping was not an option.

        I arrived in New Delhi and managed to go through the immigration very fast and managed to get my luggage fast as well. However when I went out of the airport my pick up had not arrived; so after waiting for half an hour I took a prepaid taxi to the hotel. As a seasoned traveler to New Delhi, I advice all travelers to Delhi to take a prepaid taxi and always have the hotel name and address handy. Also have the telephone number of the hotel so that the taxi driver can call (they all have mobiles) the hotel and get directions if he does not know the place exactly. So without too much of looking around the driver found the hotel.

        My past experiences with research organizations have been limited to engaging them for research in preparation for various assignments. I am looking forward to this assignment as this is the first time I will be doing work for research organizations.

        My Trip to Male, Maldives, September 2010

        The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

        View of Water Villas.

        View of Maldives by Air (Sea Plane)

        Not only did I snorkel but I also went on the “Whale Submarine”

        As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

        I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

        And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

        Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

        I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

        Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

        Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

        A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

        However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

        Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

        I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

        Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

        You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

        Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

        [Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

        Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

        Chronic Illnesses and Diet part 3

        Visualization and Chronic Disease

        To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

        The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

        The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

        Diet Start

        About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

        But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

        If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

        When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

        For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

        Blog Hunting

        Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


        In my mind, this is a battle between BlogLovin’ and Feedly.

        BlogLovin’

        I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
        What I like
        As a blogger, there are a few features that I really like about BlogLovin’. 
        1. Notifications and Blog Finding
        I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
        2. Viewing actual blogs
        Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
        What I dislike
        1. Too many clicks
        It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
        2. It’s still buggy
        I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

        Feedly

        Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
        What I like
        1. Better app integration
        There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
        Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
        Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
        IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
        Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

        2. Easy navigation
        There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

        3. Marking articles
        I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

        What I dislike
        1. Somethings get lost in translation
        Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

        2. Commenting is more complicated
        I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

        And the winner is…Feedly, mostly

        At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
        I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
        Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

        The link between carbohydrates and insulin resistance

        The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

        However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

        Diet Start

        Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

        The only people who are benefiting from refined foods are:

        • The dentists who have to patch up your decaying teeth
        • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
        • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

        Is it enough just to cut out refined carbohydrates?

        Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

        The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

        The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

        Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

        My Next Assignments…………

        Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

        Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

        The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

        • The client is not clear about what they want
        • They are haggling about rates and costs
        • The client is unsure about you and the organization you represent
        • Does not know / have the resources / decision making power to use the results of the assignment

        I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

        My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

        Free Weekend – Overwatch and Fallout 4 [Notification]

        Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
        To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

        A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

        See You In The Game!

        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

        Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

        The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
        NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

        Workout Anytime in North Fulton Newspapers

        Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

        New Workout Anytime coming to Milton
        By: Caitlin Wagenseil
        MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

        Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


        (Read More)

        My Trip to Pakistan – Islamabad December 2011

        This is my first trip to Pakistan after 9/11. The last time I was in Pakistan was in 2008, most of the contacts I had made during my last visits have not resulted in any business. However I was able to secure a training assignment which; believe it or not took 2 years to secure. It just goes to show how some clients work. The need for this training was identified over 2 years ago but due to financial and other ground realities they were not able to run the training course in Pakistan.



        The travel plans were made and I set off to Pakistan on the 9th of December. The journey started well as I got upgraded to business class and had a pleasant journey to Karachi. I was scheduled to take a domestic flight from Karachi to Islamabad. Things started to go bad when I landed. I made my way to the check in counter to learn that the PIA (Pakistan International Airlines) flight to Islamabad was cancelled. They just did not bother to contact the agents or the passengers to inform them of the cancellation. The PIA ground staff were however polite and quickly arranged me to stay at the Airport Hotel and take the first flight out to Islamabad on the 10th morning. I had to call my client and the hotel in Islamabad to inform them of the changes to my itinerary. Hurrah to mobile roaming!


        My perceptions of an Airport Hotel were based on the other airport hotels which I had stayed in (Dubai, Bangkok, Amsterdam); however the Airport Hotel in Karachi is another matter altogether. It is a real dump. I am not running down Pakistan or its people as I have stayed in very good hotels in Karachi and Lahore on my previous visits to Pakistan. This was a real house of horror. The rooms were dirty and smelly, the bathrooms were dirty and the dining hall was something else altogether. The table cloths were full of food stains and looked like they have never been bleached since the day they were made.


        The management of this hotel needs major overhauling if it is to be an airport hotel. The staff of the hotel belongs in a farm looking after animals and not in a hotel serving weary travelers. They have no idea of how to handle guest in the hospitality industry.


        I left the hotel early morning (on the 10th) and made my way to the airport to catch the flight to Islamabad. Things ran smoothly from then on and reached Islamabad on time. I was met by the Islamabad Hotel (http://www.islamabadhotel.com.pk/ ) representative at the airport and was taken to the car park to embark on the short drive to the Hotel. In the car park I saw this amazing site of a fork lift being used to move cars that had parked violating the parking rules.

        I settled in at the hotel and met the client in the evening to prepare for the start of the training. The training on Institutional & Organizational Development will run for 5 days with 25 participants.


        The first day of the training went well and the atmosphere in the training room was good and positive the client was very happy at the end of the day and was keen to keep the same momentum during then next 4 days.


        The second day of the training also went along as planned and was well received by the participants. After the training I went to the shops (Jinnah Super Market) with one of the participants as my guide. Islamabad boasts of quite a few good shopping areas with some well stocked shops in clothing. The main thing that struck me is that you do not see poverty on every corner. Islamabad seems to have a majority of middleclass to upper class people living in the city. Quite a contrast to Karachi and Lahore where you do see poverty as it is common in other cities of South Asia.


        The third day of training went smoothly without incident. After the training I met the managing director of a company which I met last when I was in Lahore in 2008. We were unable to build a working business relationship since we last met (9/11, war in Sri Lanka and the deterioration of the security in Pakistan which led to the Sri Lankan cricket team being attacked). We discussed the opportunities for joint collaboration and agreed to take the business relationship to the next level. Only time will tell is we are able to do this.


        The fourth day of the training too went well and we will be going out for dinner with all the participants. We all made our way to Monal Restaurant located about 4000 feet above sea level (http://themonal.com/monal.htm ) at the top of the hill at Margalla Hills National Park for a night time view of the city of Islamabad.

        I recommend to all who visit Islamabad to go for dinner at this restaurant, the view and the food was exceptional and so was the service. After dinner we went to Gelato Affair (www.gelatoaffair.com ) at the Gole Market to have dessert. The ice cream selection available was enormous and great tasting.


        The last day of training went according to plan and was able to conclude the training program on time as planned. The participants were appreciative of the efforts of the trainer and received excellent feedback through the training evaluation. After the customary goodbyes and promises to keep in touch we concluded assignment.


        The trip back to Colombo was on schedule; unlike while arriving at Islamabad the flight back to Karachi was on time and managed to arrive at Karachi without any hassle.

        MINIMALIST RA HOUSE DESIGN BY BAQUERATTA

        The Minimalist RA House was designed a Tokyo company called Baqueratta.They have a good past in minimalist small residences.The entire house was furnished with modern and minimalist furniture.I love this house and I hope to have someone in future, but I especially like the bathroom.

        Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

        Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

        Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

        Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

        Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

        My Trip to New Delhi & Hyderabad Cont…….

        Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

        On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

        Sample Dining Room Minimalist Design Idea

        Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

        Sample Dining Room Elegant DesignSample Dining Room Elegant Design

        Sample Dining Room Classic DesignSample Dining Room Classic Design

        Sample Dining Room DesignSample Dining Room Design
        Sample Dining Room Elegant DesignSample Dining Room Elegant Design

        Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

        Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

        Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

        Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
        Recorded with:  Bandicam (Registered Version) @ 1080p
        Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

        This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
        [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

        I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

        At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

        See you in the games!

        WORKOUT ANYTIME on FOX 56 Lexington

        WORKOUT ANYTIME on FOX 56 Lexington

        Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
        View the full segment here.

        Fast DietaryTrack rules

        During this first two weeks you need to:

        • Eat about 150g (5oz) of protein per day, which should come from a portion about the size of your palm at each meal, plus two all-protein snacks per day.
        • Eat around 20g of carbohydrates per day. A simple way to work this out is to use a set of measuring cups (a cup holds 250m1/8 fl oz). You should aim to eat approximately 3 cups of low GI vegetables or 2 cups of low GI vegetables and 1/2cup low GI fruit — at least half of which should be eaten raw.
        • Get 30 per cent of your daily calorific intake from fats, which may include: olive oil, walnut oil, grapeseed oil, coconut oil, homemade mayonnaise, flaxseed oil, small amounts of butter, small amounts of sour cream
        • Drink 8-10 glasses of water daily; you can also drink herbal teas, but avoid alcohol, soft drinks, tea and coffee, because caffeine interferes with ketosis
        • Avoid artificial sweeteners, which can stimulate insulin secretion
        • Rev up your protein levels by including at least one whey-protein drink per day
        • Eat enough — otherwise you may start to burn muscle tissue
        • Avoid starchy, carbohydrate-heavy foods such as pasta, bread and potatoes
        • Beware of hidden carbohydrates in sauces and dressings
        • Check the labels of all foodstuffs and avoid all processed foods
        • Not give up!

        Diet Start

        Dietary Q&A

        Q. I have been restricting my carbohydrate intake for days now and I have no energy. I thought this plan was supposed to make me feel better, not worse.

        A. Your body is adapting to the metabolic conversion of burning fat for energy instead of glucose. This takes about three days in most people, which is why it is usually best to start the diet over a weekend when you are able to relax more. After three days you should see a rise in your energy levels, but if you continue to feel lethargic or unwell, stop the plan and check with your doctor.

        Q. Will I get enough fibre on this plan?

        A. Fibre is provided by the inclusion of fibrous vegetables and fruit, and is increased if you eat most of these raw. However, if you experience constipation during the initial stages, try adding psyllium husks or psyllium- husk powder to your whey smoothies, because they comprise 100 per cent soluble fibre. Psyllium husks are pure dietary fibre, composed mostly of cellulose. They swell when they come into contact with water and release

        a gelatinous mass (mucilage) which passes through the colon and aids easy elimination.

        Q. Why does a lowcarbohydrate diet cause bad breath?

        A. When you are on the Fast-Track Plan and restricting your carbohydrates to around 20g (3/40z) per day, you will be burning ketones, which may cause your breath to smell a little unpleasant. Don’t worry, this is easily masked by chewing parsley-oil capsules or by using a natural breath-freshener spray. Make sure that you drink plenty of water because this will help to neutralize the odour.

        WORKOUT ANYTIME in the Daily News

        WORKOUT ANYTIME in the Daily News

        Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
        View the full article here. 

        WORKOUT ANYTIME on CNN Money

        WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

        What’s next for Blockbuster’s empty stores
        By: Patrick deHahn

        Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

        Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

        (Read More)

        1948 Packard woody station wagon and matching teardrop trailer

        https://silodrome.com/packard-eight-station-sedan-teardrop-camper/

        Eat more and more, do you know chemicals in foods blow you appetite?

        In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

        Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

        Diet Start

        Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

        Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

        Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

        Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

        Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

        Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

        Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

        Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

        Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

        Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

        HOW TO DECORATE A KITCHEN MINIMALIST

        A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

        Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

        Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

        A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

        Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

        And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

        [This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


        Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

        Go to “Update 2017-05-02


        Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

        I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


        “An Internal Error Occurred When Overlapped Buffer Is Full”


        This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






        I found a lot of people who have experienced this error, but none that had any solutions, sadly.
        So, it was Time To Go Troubleshooting! /maskandcape

        Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

        BOOM, the error pops up, interrupting the rendering process.
        Okay, time to see what could be causing it.

        First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

        Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

        So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

        I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

        Since it worked with Text and all video files now, I added in the Audio Files.

        BOOM, the error popped up again.
        That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

        I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

        Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
        I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
        I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

        So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


        My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


        If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

        • Sony’s Sound Forge (recently acquired by MAGIX, I think).
          This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
        • Audacity.
          This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
        • Adobe Audition.
          Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


        For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


        Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


        If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



        Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




        Here is what I have found after further testing:


        I did some further testing on the audio files, looking at their specific properties. 
        I found that the files giving this error were in 24bit depth, 96000Hz format. 

        Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

        Here is what I found then, during more testing on the bit depth:

        – 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
        – 24bit audio file = Only one or the other can be used at a time

        Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
        (I found that the 24bit depth audio files were also 96000Hz..)

        Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
        (when using both an Audio Filter and a Speed Adjustment at the same time)

        The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

        Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
        [Hmm, maybe I will make a Quick Tip on this, to help those people out…]

        Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
        (Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
        If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

        I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

        Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






        [Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

        The Role of B-Vitamins in Preventing Brain Loss

        One in five people older than 70 suffers from cognitive impairment which will progress to dementia and death in half of these people within five years.  So it is very important to address all the modifiable risk factors for cognitive impairment.   One of these risk factors is elevated homocysteine which is a strong, independent risk factor for Dementia, Alzheimer’s Disease, and Heart Disease.  
        One of the longest and most comprehensive studies ever done showed that one in six cases of Alzheimer’s Disease can be caused by increased homocysteine levels.
        In order to process homocysteine properly the body needs adequate levels of Folic Acid (Vitamin B-9), vitamin B12, and Vitamin B6.   A double-blind randomized controlled trial showed that the reduction of homocysteine by B Vitamins can slow the rate of accelerated brain atrophy in people with mild cognitive impairment which is often the first step towards Alzheimer’s Disease.
        Another study showed that B-Vitamins can reduce brain loss in areas prone to the Alzheimer’s Disease process. 
        Other Benefits of B-Vitamins
        B-Vitamins as a group are incredible important to a wide range of cellular and metabolic functions from energy production to production of hormones. Benefits of optimal levels include increased energy, improved mood, reduction of allergy symptoms, help preserve vision, help to maintain bone strength, and help prevent heart disease and stroke.
        How do I get B-Vitamins?
        Although it is possible to get the RDA of B-Vitamins through diet alone it requires a carefully planned diet and for vegetarians it is very challenging because there is no vitamin B-12 in vegetables. Milk, yogurt and cheese, along with eggs, are the only vegetarian food items that naturally contain significant levels of vitamin B12.
        In addition many people have conditions which prevent optimal absorption and cellular uptake of certain B-Vitamins such as Folic Acid.   Each of the key B-Vitamins come in several forms with some being much more active and effective than others.   When everything works right the body can convert other forms to the active forms, but there are many things that interfere with this process.
        For example Intrinsic factor produced in the stomach is what allows the intestines to absorb this vitamin.  Not everyone produces intrinsic factor so common sources of B-12 are not effective.
        Also since B-Vitamins are water-soluble excess amounts are easily and safely excreted so taking a high quality B-Vitamin Supplement or Multiple Vitamin with activated forms of B-Vitamins in adequate amounts is the safest way to cover yourself.    In addition, although each B-Vitamin performs critical functions in isolation they also work together to optimize many functions so taking a complete B-Vitamin Supplement is highly recommended.
        What are all the B-Vitamins?

        B- Vitamin          Active Form                                                    Inactive Form
        B-1                        Benfotiamine                                                Thiamine
        B-2                        Riboflavin-5-phophate                                 Flavin Monocleotide
        B-3                        Niacinamide                                                 NAD                                        
        B-5                        Panthothenic Acid                                         None                   
        B-6                        Pyridoxal-5-phospate                                    Pyridoxine Hydrochloride
        B-7                        Biotin                                                             None
        B-9                        Methyltetrahydrofolate  aka Metafolin         Folic Acid                                         
        B-12                      MethylCobalamin                                         Cobalamin
        Can you take too much of the B-Vitamins?
        For certain ones the answer is yes!  You should not take in more than 800mcg of folic acid supplement.  Too much can mask a condition called pernicious anemia.  Multiple Vitamins and B-Complex Supplements will contain 400 – 800mcg and more from diet is not a problem.
        For vitamin B-6 intake above 200mg per day is not recommended.  Again multiple vitamins and B-Complex will generally contain less than this amount and more from food is not an issue.
        Regular “Niacin” can cause significant skin flushing and itching, but this is harmless although it can be very uncomfortable.    Extremely high dose niacin can be used to treat high cholesterol levels but the regular form that causes flushing can also cause liver issues at high levels.   This is also true of “time-released” forms.     The best form for use for cholesterol is “Flush Free Niacin” aka Inositol Hexiniacinate as it will not cause these issues.   NAD (Nicotinomide Adenine Nucleotide) is very safe but there is no reason to take more than 10mg per day.
        As always do not take any supplement when pregnant without consulting your registered health care professional.

        Paperless Mission #9: Setting Up Your Class with Evernote

        This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

        Mission #9: Set Up Your Class with Evernote

        Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

        It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

        And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

        Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

        Step #1: Register for new Evernote accounts.

        This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

        I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

        I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

        Step #2: Build Notebooks for the Subject Areas

        My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
         

        Why Student Evernote Notebooks Rock

        1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

        2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

        3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

        Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

        Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

        What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

        Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

        Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

        I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

        Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

        and

        Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

        Both are completely free, so go get them now! GOGOGO

        [Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

        The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

        Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
        Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
        Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
        However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
        The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
        Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
        When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
        How Shoes May be Impacting Your Health
        Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
        Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
        The Health Benefits of Grounding
        Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
        Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
        Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
        All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
        So have some fun, kick your shoes off and get back to nature!
        How to get the benefits of Grounding
        Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
        For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

        My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

        January 2011

        Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

        The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

        I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

        Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

        December 2010

        It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

        It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

        As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

        You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

        The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

        November 2010

        The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

        I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

        The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

        For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

        Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

        In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

        One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

        As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

        WORKOUT ANYTIME on Entrepreneur

        WORKOUT ANYTIME on Entrepreneur

        WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

        You can view the full article here. 

        Kaempferia Galanga Plant Benefits For Health

        KAEMPFERIA GALANGA PLANT BENEFITS FOR HEALTH

        Kaempferia GalangaPlant Benefits For Health – Coughing often makes your activities disrupted, but it also would make other people around us will also feel comfortable around us. There are several types of cough, which most often is a dry cough and cough with phlegm. Coughing up phlegm is sometimes more torturous than dry cough, throat full of mucus because who wants removed.
        Now this many drug manufacturers are already providing various types of cough medicines, ranging from syrup to tablet. Besides the chemical drugs, you can also wear traditional homemade cough medicine with natural ingredients that are easily found on the kitchen, which is Kaempferia Galanga and salt.
        Kaempferia Galanga Plant Benefits For Health - 1
        Prescription cough simple and traditional ingredients that have long proven to thin the mucus, making breathing until you feel more relieved and able to relieve cough with phlegm. At the moment we are taking this medicine traditional productive cough, a sense of warmth will make the body as well as the respiratory tract would be more relieved.
        ·      Powder, How to make it quite easy. Take Kaempferia Galanga, wash clean, and peeled and grated Kaempferia Galanga and squeeze and take the water, add a little water, put a little salt and stir well, Drink the potion after breakfast and before bedtime.
        Kaempferia Galanga Plant Benefits For Health - 2
        ·      Ginger can also warm the body and treat cough with phlegm. You are experiencing a productive cough is highly recommended to drink warm ginger juice in at least once a day. How to make even very easily by slicing ginger and Kaempferia Galanga, then boiled and taken water juice. Water juice that will be taken.
        ·      Orange juice, have been many people who have felt that Lime is already mixed with soy sauce efficacious to treat cough with phlegm. If you do not like soy sauce, can mix with Honey Lime. Drink Lemon juice with soy sauce and honey as much as 2 to 3 times a day
        Easy is not it? good luck and hopefully this traditional herb cough you get well soon. Hopefully article about Kaempferia Galanga Plant Benefits For Health we share this day can be beneficial to readers. Thank You.

        My Trip to Vietnam

        I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

        The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

        My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

        Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

        I am looking forward to doing this assignment.

        10 Must-Have Tools for the Busy Teacher

        This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

        If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

        1. Nozbe

        Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

        2. Evernote

        This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

        3. Dropbox

         I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

        4. GoodReader


         I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

        5. GoogleCalendar

        I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

        6. YouCanBook.Me

        This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

        7. Planbook.com

        Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

        8. Typinator

        This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

        9. GoodReads


        Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

        10. Edmodo

        I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

        With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

        What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

        This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

        And More: Deals and Sales – Fallout, Fallout 2 and Fallout Tactics – All 3 Games Completely Free Until The End Of December 13th at Good Old Games (gog.com)

        Pardon me, I got so excited seeing this great deal, I forgot that they aren’t called Good Old Games anymore (since sometime last year..). Don’t let that stop you from taking advantage of this absolutely Free Gift from GOG.com: Fallout 1, Fallout 2 and Fallout Tactics are all wrapped up with a bow for the Holidays and waiting for you to add to your DRM-free collection at their website – see the full details there: http://www.gog.com/news/free_games_fallout_fallout_2_and_fallout_tactics

        I hope you catch’em in time and See You In The Games!

        Workout Anytime in Louisville Business First Inbox

        Workout Anytime in Louisville Business First

        Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
        You can read the full article here. 

        Franchisee Profile: Bill and Bob Aicklen

        Franchisee Profile: Bill and Bob Aicklen

        Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

        Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

        In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

        The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
        How did you learn about Workout Anytime? 
        We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
        Why did you choose an opportunity with Workout Anytime? 
        From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
        How has business been since joining the brand? 
        We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
        Are you involved in any charities or community outreach?
        We localize our charity work depending on the club, and we usually donate free memberships for silent 
        auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

        5 Tips to Make Your Paperless Classroom Work

        I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

        1. Begin the year with a typing boot camp.
        The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

        2. Transition gradually.
        When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

        3. Try to give options.
        Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

        4. Don’t force it.
        There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

        5. Stay flexible, and have a backup plan.
        At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

        Any tips to add? I’d love to hear your thoughts in the comments section.

        This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

        Globesity continue…

        WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

        • They had an active lifestyle
        • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
        • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
        • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

        Warning signs from the present day

        Diet Start

        • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

        In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

        • In 2002 the National Audit Office in the UK revealed the following facts:

        58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

        In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

        In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

        The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

        • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

        Do you have Food Cravings? Food Cravings Test

        • Do you frequently eat until your stomach is uncomfortably full?
        • When you get hungry, does it make you feel tense, weak, or irritable?
        • When you get hungry, do you sometimes focus on one or two specific foods?
        • Do you snack often, usually eating the same snacks?
        • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
        • Diet Start
        • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
        • Do you usually need dessert after dinner to feel satisfied?
        • Do you tend to eat a relatively narrow range of foods?
        • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
        • Do you sometimes feel as if you lack control over what you eat?
        • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
        • Do you binge on food more than once per week?
        • Even if you know a food doesn’t agree with you, do you eat it anyway?
        • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
        • When you eat one of your favourite foods, does it generally improve your mood?

        If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

        When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

        July Currently & Goals & a Meet Up!

        Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

        Currently July

        I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

        Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

        Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

        Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

        Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

        Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

        Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

        July Goals

        I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

        Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

        Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

        Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

        School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

        Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

        Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

        Southeastern Bloggers Meet Up!

        Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

        Click on any of the images below to connect with Jivey’s blog where you can RSVP.

        I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

        5 Reasons to Flip Your Math Class

        Of all the subjects, math is probably my favorite to teach. But it is definitely not easy. By the time students are in fourth grade, there’s often a wide range of abilities. Last year, I had students who could barely add and subtract and others who were working well beyond grade level. Trying to design lessons that worked for them was a real challenge. If I moved too quickly through the lesson, several students would get lost. If I moved too slowly, others would get bored and start causing different problems.

        Then I attended the Georgia Educational Technology Conference and heard some sessions about flipped teaching, and a lightbulb went off.

        If you’re not already familiar with flipped teaching, the idea is that we need to “flip” the traditional way we teach — lesson at school, practice problems at home as homework. Instead, students should watch a short video lesson as homework to prepare for class, and then the majority of class time is spent working on practice and application while I’m there to guide them.

        I did this pretty consistently for the second half of the year, and I couldn’t be happier with the results. There were so many advantages.

        1. Students became more confident.

        For some kids, math can be intimidating. Everyone works at different speeds. What may be an obvious concept for one kid may take multiple explanations for another. There’s lots of vocabulary and room for mistakes, and when you feel like other kids are getting it faster than you, your confidence suffers.

        All of this went away when I flipped.

        Students were watching the videos at home on their own. No one knew whether they needed to replay something a couple of times until they got it. No one knew that they had to pause the video for 5 minutes to try a problem that others would have solved in 30 seconds. They could all work at their own pace, and they came to class more confident and prepared for practice the following day. The attitude shift in my students this year was reason enough for me to continue flipping.

        2. Parents were less stressed.

        There have been so many times when I’ve heard parents complain about math or express their discomfort in helping their child because they weren’t taught math the way we teach it now. And I get that. I remember thinking in my math methods courses that I could have been great at math if someone had explained it to me better as a child rather than having me memorize algorithms.

        Having the flipped model created allies from a lot of math-hating parents. Some would watch the videos along with their children and have those lightbulb moments where concepts and strategies would suddenly make sense. Others expressed a sense of relief that they didn’t have to worry about “undoing” the things we were doing in the classroom by just jumping to the standard algorithms. We were all more comfortable with the math.

        3. I had more time to see what students could actually do.

        While I always tried to keep my in-class mini-lessons short, there were days when they would drag on because some kids just weren’t getting it. By the time I felt confident they could try some problems on their own, we hardly had any time left. And by the time they got home to do it as homework, they’d forgotten what we’d spent the morning talking about, so they were back to square one.

        Now that I’ve flipped, I only need 5-10 minutes maximum at the beginning of my math block to do anything whole group. I spend that time answering questions, clarifying any misconceptions, and checking the 1-2 practice problems that I typically include at the end of the video. The rest of my math block was then spent working with small groups, conferring with kids, and getting into richer practice and problem solving than I could ever fit in before.

        I also didn’t have to worry about students getting the right answers only when their parents “helped” them. When it came time for assessments, I had a much better sense of where my students were at and what to expect from them because I was more deeply involved in their learning.

        4. I didn’t have to worry when we had a sub. 

        In the past, I would write off sub days as lost instructional time when it came to math. Now that I’ve flipped, that is no longer the case. I include a link to the video I’ve created in my sub plans, and I have the sub watch the video with the class again to start the lesson. Usually that gives the sub enough background knowledge to help with the learning task, and my students have enough scaffolding from my instruction that they can work through the practice. It made those lost days so much more productive.

        This year, I will be on maternity leave for 12 weeks, so I’m nervous about what will happen with my kids while I’m gone. But I’m less nervous about the math because I already have videos made for most of those lessons from last year. My students will have continuity in math instruction because of it.

        5. Students were more successful and could tackle bigger challenges.

        Last year was my best year ever as far as student performance on end-of-year assessments and benchmarks. I think a big part of that can be attributed to the move toward a flipped model for math. My students had more time and confidence to master the fourth grade standards, and as a result, I was easily able to push them into bigger challenges. When I surveyed the students mid-year about the flipped model, their responses were overwhelmingly positive in support of it, and I knew it was something I need to continue in the years ahead.

        Next Steps

        This will be the first year that I use the flipped model for the whole year, so I will need to prepare more video lessons and give some thought to how I’ll transition my students (and their parents) toward this model. In the weeks ahead, I plan to share more about the tools I use to create flipped lessons and some troubleshooting tips for problems that might come up.

        Now that I have some experience flipping, I’m going to go back and reread Flip Your Classroom: Reach Every Student in Every Class Every Day by Jonathan Bergmann and Aaron Sams. Jon was one of the speakers I saw at GaETC, and he’s one of the founders of the flipped classroom movement. I read the book quickly as I started to flip, but I think there are more ideas to be pulled from it.

        I’m also starting to think about other areas where I could flip instruction. One possibility might be some of the grammar, vocabulary, and word study components of my ELA block. I consistently struggle to fit everything in to that time, and flipping might be the answer. I’ve downloaded the book Flipping Your English Class to Reach All Learners: Strategies and Lesson Plans by Troy Cockrum, and I’m hoping that will give me some more inspiration.

        Have you tried flipping any parts of your instruction? I’d love to hear more about your ideas and experiences in the comments!

        Teenager’s Room Rockstar Design For Real RockStar

        Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

        Teenager’s Room Rockstar or Musician Themed

        Teenager’s Room Rockstar or Musician Themed

        Teenager’s Room Rockstar Design For Real RockStar

        Teenager’s Room Rockstar Design For Real RockStar

        Teenager’s Room Rockstar or Musician Design

        Teenager’s Room Rockstar or Musician Design

        My Trip to Thailand

        When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

        The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

        Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

        Ten Risk Factors That Cause Food Reactions (1-5)

        The primary cause of most food reactions is incomplete digestion. At almost every meal, we eat foods that we don’t completely digest. The results are disastrous. When we eat foods we can’t digest, we almost always have some type of reaction.

        Food that isn’t completely digested can enter our systems in large food macromolecules that cause a great deal of trouble. The body perceives these macromolecules of partly digested food as foreign invaders, similar to bacteria, viruses, or parasites. Then the body attacks them with the full force of the immune system.

        This immune inflammatory attack creates the symptoms that you hate: fatigue, weakness, heartburn, aching joints and muscles, nasal stuffiness — and false fat.

        There are several factors that most often cause incomplete digestion. To get started on the False Fat Diet, you’ve got to understand these factors and avoid them. In order of importance, here they are.

        Risk Factor 1. We eat too narrow a range of foods.

        It’s estimated that the average person gets about 75 per cent of his or her calories from just ten different foods. Most of us have our favourite foods, such as wheat and dairy products, and we rely on them far too much. When we overeat any one food, we exhaust our body’s ability to fully digest it.

        Diet Start

        Risk Factor 2. We eat too many fake foods.

        We eat synthetic foods, such as fake fat and artificial sugar, that are manufactured in factories. No wonder we can’t digest this stuff! Furthermore, most of our packaged foods have been crammed with chemicals that human bodies cannot adequately metabolize. Often, a synthetic food has a long shelf life precisely because it can’t be broken down by nature.

        Risk Factor 3. We have digestive enzyme deficiencies.

        Many people are dangerously low in the enzymes that digest food. Even when these people eat healthy foods, they don’t have enough pancreatic enzymes to break the foods down properly.

        Millions of people haven’t been genetically endowed with the right digestive enzymes to thrive on a modern, industrialized diet. For example, African Americans are ten times more likely than Caucasians to lack the enzyme that breaks down milk. Because a lack of enzymes is a common problem, the False Fat Diet generally includes supplementation with specific enzymes.

        Another cause of enzyme insufficiency is our failure to ingest the natural enzymes that exist in foods. Many whole, unprocessed foods automatically come with the enzymes that are needed to help digest them, but before we eat these foods, we often kill the enzymes by cooking, processing, irradiation, and storage.

        Because it’s important to eat foods with live enzymes still in them, patients on the False Fat Diet tend to eat a lot of fresh, whole, raw foods.

        Another critically important digestive substance that millions of people lack is stomach acid, or hydrochloric acid. Unfortunately, production of this acid decreases as we age, which is why indigestion is more common among older people. Many people mistakenly think they have too much stomach acid, because they often get heartburn — but the opposite can be true. Heartburn can also be a sign of low acid. When you don’t have enough existing stomach acid from day to day, your stomach secretes too much when you eat to make up for the deficiency. Later on, I’ll tell you how to fix this deficiency.

        Risk Factor 4. We eat food that is too refined.

        Too much of our food is stripped of fibre and then shredded, pulverized, powdered — and finally stuck back together again with gluey fillers. By the time we eat it, it’s not much more than a predigested mush of starch and sugar. Unfortunately, this excessive processing often allows the food to rush into the bloodstream before it undergoes the complete digestive process. If this ‘predigested’ food still had its fibre, it would stay in the gut long enough to be fully digested, or it would be carried all the way through the system by the fibre and eliminated. Because of this factor, I urge people to avoid overly refined foods.

        Risk Factor 5. We create our own intestinal problems.

        One of the most common and harmful of these problems is a condition that allows undigested food macromolecules to slip through the intestinal wall. This condition is called ‘leaky gut syndrome,’ and doctors have only recently realized how hazardous it is. A leaky gut‘s wall is more permeable than it should be.

        This permeability can be caused by eating chemical additives and also by drinking coffee or alcohol with meals. If you’ve noticed that you most frequently have food reactions when you have a cocktail with dinner or coffee with breakfast, you may have leaky gut syndrome.

        Another primary cause of leaky gut syndrome is overgrowth of the natural yeast Candida albicans. Candida is usually present in the body and is mostly found in the mucous membranes — especially those in the intestines. It normally stays in balance with other healthy bacteria, but it can get out of control and increase gut wall permeability. It proliferates if you:

        • Take antibiotics, which kill all bacteria.
        • Take birth control pills.
        • Take steroid drugs.
        • Eat foods, such as sugar, that cause yeast to multiply.
        • Eat things that contain lots of yeast, such as bread and beer.
        • Have impaired immunity.

        Candida is a major cause of bloating and often causes a ‘beer belly’ look. In fact, I think that many heavy beer drinkers with beer bellies aren’t nearly as far as they look, but are just swollen with candida, reactive gas, and fluids. I had one patient who lost his beer belly in a matter of days on the False Fat Diet. He was thrilled with his quick response, and it motivated him to stay with the diet.

        EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

        Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

        EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

        EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

        EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

        EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

        EXOTIC KITCHEN CONCEPT HOME FULL COLOR

        EXOTIC KITCHEN CONCEPT HOME FULL COLOR

        EXOTIC BATHROOM CONCEPT HOME FULL COLOR

        EXOTIC BATHROOM CONCEPT HOME FULL COLOR

        EXOTIC BEDROOM CONCEPT HOME FULL COLOR

        EXOTIC BEDROOM CONCEPT HOME FULL COLOR

        Cellulite Breakdown and Essential Detoxification part 1

        Waist Disposal

        `Excess fat is nothing less than a poison depot in an over-acid organism.’ These words were uttered half a century ago by Danish physician Kristine Nolfi — an expert in healing the body through diet. They lie at the core of the cellulite phenomenon. One of your body’s most effective ecological mechanisms for protecting itself from excessive poisons taken in through food, air and water or produced from within as a by-product of metabolism is to lock these toxic materials into fat cells. In the case of cellulite this natural protective mechanism goes one stage further — encasing these wastes in the interstitial fluids and ground substance by binding them within hardened connective tissue. There they sit year after year producing jodhpur thighs.

        Diet Start

        Personal Energy Crisis

        This whole self-protective process is perfectly normal and, all in all, functions rather well, except for two things. First, in the presence of a high level of female hormones it tends to turn intocellulite. Second, it tends to deplete your energy — not only on a cellular level so metabolic processes don’t function in an optimal way but overall so you are prone to fatigue and need stimulants such as coffee to get you going and to keep you going. For in any body which has a high level of waste stored in its cells, much of the available energy is channelled into trying to cope with these wastes instead of being used to keep metabolic processes functioning at a high level of efficiency. In broad terms you sense a lack of overall vitality and over the years develop a tendency to become chronically tired — sometimes so much so that it can even become very difficult to make the effort to help yourself. To shed cellulite you need first to help your body detoxify itself and eliminate the pockets of static tissues where, like stagnant ponds in a meadow, toxicity has been allowed to accumulate.

        A lot has been written in recent years about detoxification. Some of it can sound quite mystifying. But the whole process is really quite simple. The reason you have built up these pockets of wastes is simply that your body is continually having to cope with more poisons than it can eliminate in the normal day- to-day course of events. Remove some of the burden of what is creating this excess toxicity in your system by laying aside coffee, alcohol and over-processed foods complete with chemical additives for a time, and you are halfway there. Add to that a very simple and temporary regime designed to trigger rapid detoxification, some movement and some external help, and quite naturally you trigger your body’s own mechanisms for clearing out the junk. This is the first step in the Cellulite Revolution. There are lots of ways you can do it but the simplest of all to begin with is to go on a two-or-three-day applefast.

        Applemagic

        The apple has long been valued as health tonic, medicine, cosmetic and bowel-regulator all in one. Apples are low in acidity to help balance stored bodily wastes which tend to be acidic. They stimulate the flow of saliva in the mouth and clear away debris from the teeth. Eating raw fresh apples stimulates circulation in the gums too. In folk medicine the apple was traditionally used for eliminating obesity (in part no doubt because of its detoxifying ability) as well as for the treatment of skin problems, bladder inflammation, anaemia, insomnia, intestinal parasites and even bad breath. In recent years we have come to appreciate the kind of fibre apples contain. In addition to cellulose (the most common variety of fibre such as that in bran which binds water and increases faecal bulk), apples are also rich in pectin — a special form of fibre with exceptional detoxification properties. Unlike cellulose, pectin does not bind water. It is water-soluble. Pectin has no influence on faecal bulking, but it can be an excellent substance to help lower cholesterol and for eliminating bile acids from the intestines. Also, and in many ways most important of all for keeping cellulite away, pectin is a natural chelating agent for binding dangerous heavy metals in the body such as aluminium, cadmium, mercury and lead, and eliminating them.

        Proven Ways to Avoid Holiday Weight Gain

        As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
        Here are some key tips:
        Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
        Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
        Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
        Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
        Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
        Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
        Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
        Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
        Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
        If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

        Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
        Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
        Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
        Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

        Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

        Paperless Mission #6: Setting Up GoodReader (iPad)

        This is the sixth post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

        • Mission #1: Gather Your Tools
        • Mission #2: Build Evernote Notebooks
        • Mission #3: Email Notes to Notebooks
        • Mission #4: Create Checklists in Evernote
        • Mission #5: Organize Your Files in DropBox

        Also be sure to link up at the Go Paperless! Linky. 

        Mission #6: Setting Up GoodReader (iPad)

        As I’ve mentioned before, I work off a lot of devices. I’m in a 1:1 iPad classroom, but even before my students had access, I had an iPad of my own that I used constantly. I liked having it handy for anything that I was working on, and once I learned about GoodReader, my love for the iPad grew tremendously. I’ve shared some love for GoodReader before, but GoodReader is the ultimate document reader for the iPad. It allows you to read any type of document and annotate over .pdf files. It also syncs with a variety of other apps, allowing you to pull and read all of your important documents into one place.

        Once you have your important documents organized on Dropbox, open up the GoodReader app on your iPad. Here, you’ll be able to connect GoodReader to your Dropbox account. To do this,

        My documents list already has some items and folders listed, but yours will likely be empty. The left column shows all of the folders and documents you have saved in GoodReader (and could therefore access without an internet connection). The right column has all of the utilities for GoodReader. Today, we’re going to focus on the one towards the bottom — “Connect to Servers.” 
        When you click on the “Add” button, you’ll be able to see the many, many connections GoodReader can make. Here are a few highlights:
        • Popular Mail Servers (GMail, Hotmail, etc.) – this connection doesn’t grab all of your emails, but it will allow you to see any messages that have an attachment. This is great for when you’re at a meeting and somebody sends out some documents you need.
        • Dropbox – you can read all of the files that you’ve saved there.
        • Google Drive – view any type of Google Drive file that you have — from spreadsheets to presentations to documents.
        The connection set-ups are fairly intuitive. You will need to name each set up (On some screens that shows up as “Readable Title;” I named mine based on what I was connecting to), but then you simply enter your username. You can also enter your password, in which case it will be saved to the device and you won’t have to enter it again, or you can log-in each time you want to access a document.
        As you can see from my left column, there are a few folders that I’ve downloaded straight to GoodReader so they’ll always be available to me. These are folders that I’m constantly using and want easy access to. I also have it set up so that they’ll automatically download updates to those folders whenever I add more documents to my Dropbox account. 
        Once the folders are set up in GoodReader, you can read the documents, but you can also annotate over .pdf files. I use that feature a lot on my curriculum documents, and I’ve also started doing all of my running records and reading assessments on my iPad. Here’s an example that shows you the annotation tools in the document viewing pane:
        I keep my annotating toolbar pinned on the right side, and there you can see a variety of annotation options that are available — typewriting text, creating “sticky notes,” highlighting, underlining, drawing boxes, arrows, etc., and the last option is the freehand tool. I use this for running records with a stylus.
        One of the best things about GoodReader is that it works well with other apps. Once I finish annotating a document, I can send it to other apps such as Evernote or Dropbox  from the original “My Documents” screen.

        How I Use It

        This is one of my must-have apps because of the broad range of ways it can be used:

        • Turn your iPad into a second computer monitor — When I’m using lots of curriculum documents to write unit plans, I can leave it open in GoodReader with all of my notes and highlights while I work on my laptop or computer. No more switching between screens on my computer. (Am I the only one who finds that annoying sometimes???)
        • Highlight standards that you’re focusing on each term without having to print out (or lose) new documents all the time.
        • Annotate rubrics, running records, and other types of student work
        • Use with students to create paperless assignments

        I’ll be posting more in-depth tutorials about how to do all of these in future installations of this series, but for now, your challenge is to begin exploring GoodReader. Then, in the comment section, share a bit about how you think this app could be useful.

        Spring break starts next week for me, and I can’t wait! I will try to get another installment posted this week, but I make no promises. It’s the end of the term, and that’s always a super-busy time with report cards and grading. I must say, however, that I’m more organized than ever going into this given how much less paper I’m using!

        Have a great week!

        The carb connection

        Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

        THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

        1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

        2. Double sugars, or disaccharides: lactose (milk sugar)

        Diet Start

        3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

        The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

        So why are carbs the bad guys?

        Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

        The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

        Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

        BEAUTIFUL INTERIORS STYLE FROM SHH

        SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

        BEAUTIFUL INTERIORS FROM SHH

        BEAUTIFUL INTERIORS FROM SHH

        We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

        BEAUTIFUL INTERIORS FROM SHH

        BEAUTIFUL INTERIORS FROM SHH

        BEAUTIFUL INTERIORS FROM SHH

        BEAUTIFUL INTERIORS FROM SHH

        BEAUTIFUL INTERIORS STYLE FROM SHH

        BEAUTIFUL INTERIORS STYLE FROM SHH

        BEAUTIFUL INTERIORS DESIGN FROM SHH

        BEAUTIFUL INTERIORS DESIGN FROM SHH

        My Trip to Bangladesh Cont…..

        The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

        WORKOUT ANYTIME on WYFF Greenville

        WORKOUT ANYTIME on WYFF Greenville

        Jennifer Young and Laura Stokes of WORKOUT ANYTIME Easley were recently featured on two segments on WYFF Greenville. The segments focus on easy holiday workout tips, and Jennifer and Laura do a fantastic job talking about the different services and facilities offered at WORKOUT ANYTIME
        View the segments here and here. 

        My Trip to Bangladesh June 2011

        The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
        The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
        The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

        Training Biceps and Triceps with Fat Circular Bands

        If you want to take your guns to the next level consider adding in band training.    Those flat circular bands you see in the MX4 Area of the club are serious training tools!    These bands provide the advantage of increasing resistance throughout the range of motion to challenge your muscles in a different, yet complimentary way to free weights or machines.

        There are a number of ways to trains biceps with bands from the most simple which is just standing on the band with feet spread and holding the upper loop of the band on both or one and handing and curling up and down.      You can also stand  with one or two feet in the center of a band and grap the two looped ends and curl the end/ends up to pump up those biceps.       Another option is to attach band handles to the band to allow you to use even more resistance.     Standing on one foot in the enter of the band will give less resistance than standing with two feet spread apart.

        You can also attach a band to an immovable object like a post or even a door using a door holder (see www.resistancebandtraining.com to purchase one of these.  Another option to create more length is to attach a band low and behind you and then loop another band through this band and attach handles to the band on both ends.      With your back to the anchor grasp the handles and step forward to create some level of tension in the band keep your fee in a split stance and head-up.   Do a bicep curl  with the handles and as you fatigue take small steps back to do drop sets.   This exercise emphasizes the stretched position of the bicep comapred with the single band bicep curl described above.

        You can also get an incredible tricep workout using bands using the set-up described above with handles attached to the bands.    In this case turn your back to the anchor grasping the handles with elbows held high by the sides of your heads.   Brace the core while in a split stance and keep the elbows high and motionless then extend your elbows – wow does that create a pump and burn!

        To see exactly how to set-up and perform these incredible bicep and tricep exercises using flat circular bands and handles check out this video from resistancebandtraining.com:  https://youtu.be/mF-FbNSPF2Q

        TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


        Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


        Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

        This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

        The Experiment

        For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

        Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

        The Test

        For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
        I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

        The Data

        Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

        FurMark: Score (2127), Average Framerate (40fps)
        FurMark: Score (3959), Average Framerate (65fps) SLI
        Lost Planet 2 – Benchmark B: Average Framerate (44fps)
        Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
        Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
        Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
        Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
        Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
        Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
        Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

        Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
        Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
        Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
        Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
        (Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

        Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
        Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
        Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
        Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




        Here are some unscripted, raw gameplay framerates, averaged:
        (multiple samples taken of each with FRAPS’ built-in benchmarking utility)

        Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
        Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
        Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
        Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

        Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
        Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

        *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
        *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
        [*Game does not appear to be fully optimized currently, article with more detail here:
        http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


        Here are the PhysX tests, done with FluidMark:

        FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
        FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
        FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
        FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
        FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

        The Conclusion

        So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

        For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
        In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
        Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

        The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

        It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

        What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

        Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

        Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
        That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

        Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

        Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

        Taking pills and supplements

        Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

        Over-the-counter (OTC) diet pills

        The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

        Diet Start

        Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

        Supplements

        To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supp